Nokia BH-201 manual Battery information, Clear the settings or reset the headset

Page 7

If your phone supports last number redialing with the headset, press the answer/end key twice briefly when no call is in progress.

If your phone supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your phone.

To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice.

To switch the call between the headset and a compatible phone, press and hold the answer/end key.

To adjust the headset volume, press the volume key up or down.

Clear the settings or reset the headset

To clear the settings, press and hold the power key and the answer/end key over 10 seconds.

To reset the headset if it does not function properly, although it is charged, plug the headset into a charger, and press the power key and the answer/end key at the same time.

Battery information

Your headset is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this headset.

Unplug the charger from the electrical plug and the headset when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

7

Image 7
Contents Nokia Bluetooth Headset BH-201 0434 Introduction Bluetooth wireless technologyConnect the charger to a wall outlet Charge the batteryGet started ChargersSelect the headset from the list of found devices Charging the battery fully may take up to 2 hoursSwitch on your phone and the headset Pair the headsetCall handling Basic useWear the headset Change the earbudClear the settings or reset the headset Battery informationNever use any charger that is damaged Care and maintenanceElectronic components can be damaged