Volume Punch-through

In many systems, the VOLUME is adjusted at the TV set or the A/V processor. For convenience, the RR-1090 has a VOLUME PUNCH-THROUGH fea- ture that copies the volume commands from either the TV device or any programmed A/V device to device keys for other components such as CD play- ers, VCRs, SAT receivers, and DVD players. After enabling this feature, volume controls from either the TV or A/V processor are available even when one of these other DEVICE command sets is active.

To enable the VOLUME PUNCH-THROUGH feature:

1.Press the MENU button to reach the main menu.

2.Select PREFERENCE from the LCD display.

3.Select PUNCH THROUGH from the LCD display.

4.Select the volume commands (from either the TV command set or an A/V command set) to copy to another DEVICE by selecting either TV VOL or AMP VOL from the LCD display. If you select AMP VOL, you will need to select the A/V com- mand set with the desired volume commands (AV1, AV2, or AV3) from the next LCD display menu by pressing a MENU COMMAND key.

5.Press a DEVICE button to select the target device where you want the volume commands to be copied. The VOLUME PUNCH THROUGH com- mand cannot be copied to a TV device or any A/V device. They can be copied to any other kind of device (CD, SAT, LD, DVD, etc.). If you select an improper DEVICE key, nothing happens. After you have selected an allowable DEVICE key, a confirmation PUNCH THROUGH OK appears in the display.

6.Press the MENU button to return to the main menu.

RESET Function

You can return the RR-1090 to its original factory programming at anytime by using the RESET func- tion.

English 13

To reset the RR-1090:

1.Press the MENU button to reach the main menu.

2.Press the PAGE button to advance to the second page of options.

3.Select REMOTE SETTINGS from the LCD display by pressing the MENU COMMAND key above the first letter of the REMOTE SETTINGS label.

4.Select RESET from the LCD display by pressing the MENU COMMAND key below the first let- ter of the RESET label.

5.Select YES or NO to confirm. If you select YES, the RR-1090 will erase all custom programming and return to its original factory settings, displaying a series of progress messages followed by the final confirmation DEFAULT SETTING.

6.Press the MENU button to return to the main menu.

DUPLICATE Function

The DUPLICATE function transfers programming, including learned commands and custom labels, from one RR-1090 to a second RR-1090. You have the option of transferring data from just a single DEVICE key or from all eight DEVICE keys. To transfer the programming, place two RR-1090 remotes with their IR windows facing each other, then proceed as fol- lows.

On the remote that will be receiving the data:

1.Press the MENU button to reach the main menu.

2.Press the PAGE button to advance to the second page of options.

3.Select DUPLICATE from the LCD display by press- ing the adjacent MENU COMMAND key.

4.Select RECEIVE from the LCD display by press- ing the adjacent MENU COMMAND key. A READY TO RECEIVE INDICATOR appears in the display.

NOTE: Using the RESET function erases all learned commands, labels, and configuration settings. Make sure this is what you want to do!

Page 13
Image 13
Rotel RR-1090 Volume Punch-through, Reset Function, Duplicate Function, On the remote that will be receiving the data