Rotel owner manual 12 RR-1090, Custom Device, Deleting Stored Commands

12RR-1090

5.Enter the new label for the macro by pressing MENU COMMAND keys corresponding to the letters in the display (using the M3 or M4 but- tons to move to the next page of letters). Labels can be up to 5 characters long. After entering the label, press the MENU button to store it.

6.Memorize the first step in the macro. Press a DEVICE button to change to the desired device and individual COMMAND keys to memorize commands from the selected device (press the PAGE button to see additional pages of avail- able commands).

7.To memorize additional commands, press the selected MACRO button to confirm the previous memorized command and then memorize the next command. Repeat until the entire sequence has been stored.

8.When the entire macro sequence has been en- tered, press the MENU button to store the macro sequence.

NOTE: A macro sequence can contain up to 10 com- mands, not including any DEVICE button presses.

Custom Device Page

Generally, all commands stored under a DEVICE button operate a single component. However, it is possible to build one special command set, called a CUSTOM PAGE, which includes individual com- mands copied from other devices. For example, you could build a CUSTOM PAGE command set con- taining copies of the most used commands from all devices, providing a simple-to-use subset of favor- ite commands. This CUSTOM PAGE command set can be accessed by pressing the DEVICE button where it is stored. To build a custom device page:

1.Press the MENU button to reach the main menu.

2.Select PREFERENCE from the LCD display.

3.Select CUSTOM PAGE from the LCD display.

4.Press the DEVICE button where you wish to store the CUSTOM PAGE command set.

5.Enter the new label for the device by pressing MENU COMMAND keys corresponding to the letters in the display (using the M3 or M4 but- tons to move to the next page of letters). Labels can be up to 7 characters long. After entering the label, press the MENU button to store it.

6.Press a DEVICE button to select the device where the first command you wish to copy to the CUS- TOM PAGE is located.

7.Press the COMMAND key for the first command you wish to add to the CUSTOM PAGE.

8.Select the location in the CUSTOM PAGE where you wish to store the command by pressing any MENU COMMAND key. The label for that com- mand appears in the selected location.

9.Repeat steps 6 - 8 for each additional command you wish to copy to the CUSTOM PAGE.

If you wish to auto-arrange the commands, press the M4 button. Press the MENU button to return to the main menu.

NOTE: To copy additional commands at any time, repeat steps 1–3 and steps 6–10. Because you are copying to an existing CUSTOM PAGE, steps 4 and 5 are not necessary and will be skipped.

Deleting Stored Commands

You can erase previously stored commands:

1.Press the DEVICE button containing the command you wish to delete.

2.Press the MENU button to reach the main menu.

3.Select EDIT from the LCD display.

4.Select DELETE KEY from the LCD display.

5.Press the COMMAND key you wish to erase. You can delete commands from BASIC COM- MAND buttons or MENU COMMAND keys (using the PAGE button to scroll through the avail- able pages of commands).

6.Select YES or NO to confirm the deletion.

7.Repeat steps 5 and 6 to delete additional com- mands. If desired, press the M4 button to auto- arrange the new commands in the display. Press the MENU button to return to the main menu.

NEW TEXT INDICATED IN RED