NetComm V90 manual Selecting Ring Tones, To set the Ring Tone, Audio Codec Preference

Page 14

Example: [1-2]xx34xx3[1-3,5-9]xxx0xxxxxxxxx.

•Dialing 1 or 2 will send invite after 3 digits.

•Dialing 31, 32 ,33, 35, 36, 37, 38, 39 will send INVITE after 5 digits.

•Dialing 34 will wait for two more digits before sending INVITE.

•Dialing 0 will send invite after 10 digits.

•The “.” On the end will allow for any number not specified in the digit map to be dialed normally requiring the user to enter a delimiter or wait for a timeout. If the full-stop is not at the end of the Dial Plan, the V90 will display “INVALID NUMBER” for anything dialed that is outside of the scope specified in the dial plan.

Note: If the “.” Character is not included (eg. “3xxx.”) as an option in the digimap then numbers that are not specified by the digimap will not be sent to the system when dialed (ie. the V90 will not output an INVITE packet and “INVALID NUMBER” will be displayed on the screen). Multiple Server Mode has different Dial Plan for each profile and Single Server Mode only has one Dial Plan for all four contacts.

Selecting Ring Tones

Distinctive ring is supported in both Single Server Mode and Multiple Server Mode. Each Contact or Profile contains a Ring Type field which can be assigned to one of the four predefined ring tones.

To set the Ring Tone:

On the Preference screen under Call Settings menu, select a ring tone type on the list beside the label Ring Type1(2, 3 or 4 depending on the profile/contact selected). However, it will be best to select the Ring Tone via the V90 Keypad Menu (Press Menu, 3, 5, choose the profile/contact and use the Up and Down keys to adjust) since you can hear the Ring Tone selected while the selection is made.

Audio Codec Preference

This menu will allow the user to enable / disable individual codec and change their priority using the UP and DOWN button.

Note: In Multiple Server Mode, user can set different Audio Codec Preference for different profiles.

Notes: Please consult your VoIP Service Provider for more information regarding the settings in Advanced Settings and Media Settings under Call Settings page.

V90 VoIP Phone User Guide

YML871Rev1

14

www.netcomm.com.au

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide Easily without any hassles? Contents V90 VoIP Phone User Guide Overview NetComm V90 Physical Layout Key Features NetComm V90 VoIP Phone SpecificationAdvanced System Features Shipping Contents Configuring the NetComm Installation Basic ConfigurationHardware Installation Accessing the NetComm V90 VoIP Phone Web ConfigurationConfiguring the NetComm V90 VoIP Phone SIP Phone number Display nameMore Configurations PreferencePC Port Configuration Network ConfigurationLAN Port Configuration Call Settings Audio Codec Preference Selecting Ring TonesTo set the Ring Tone Phone Settings ToolsReset Configuration Settings System RebootNetComm V90 VoIP Phone Operation Making and Answering CallsDialing from the Speed Dial Redialing the last number dialedDialing from the Call History Putting a Call on Hold Using other Call FeaturesUsing Voicemail Three Way ConferencingOther Phone Operations Adjusting the LCD Contrast Resetting Phone ConfigurationLCD Indicators Appendix a Function Key Function that can be used for the function keys Appendix B Legal & Regulatory Information Customer InformationProduct Warranty Limitations of WarrantyYour ADSL2+ connection Product Warranty Contact Information Email support@netcomm.com.au
Top Page Image Contents