Linksys SPA942, SPA962, SPA932, SPA922 Understanding Extensions, Shared Line or Call Appearances

Page 37

Getting Started

Understanding Lines, Calls, and Shared Call Appearances

SPA962: six lines

SPA932 sidecar for the SPA962: 32 lines

Each line corresponds to a phone number (or extension) used for calls. The number of extensions you see listed in the SPA9x2’s Extension Status depends on how many lines the phone has. A “call appearance” physically corresponds to a line key on a station, so a call appearance is an instance of an extension.

NOTE: Each line can support two calls. So, for example, the SPA942 can hancle eight calls. One call can be active (in conversation)and seven can be on hold.

When the same extension is assigned to line keys on more than one station, it is called a shared line appearance. Extension 1 is referred to as the primary extension. Some features can be activated only on the primary extension, such as call forwarding.

One extension can be assigned to multiple line keys on a phone. In fact, all four call appearances can be instances of the same extension or phone number. An extension is not a shared line appearance unless it is also assigned to a line key on another station.

Understanding Extensions

Extensions contain core account information and control parameters.

Although the account information is usually the same for a shared extension on different stations, the other parameters can differ. For example, the dial plan or the preferred codec to use when making a call on an extension could be different for two different stations sharing the same extension.

Lines can be in the following states:

Disabled: The line key is disabled

Idle (Ready): Ready for use

Dialing: Collecting digits from the user to be dialed out from this line

Calling: Waiting for the called party to respond

Proceeding (Progressing): Called party station is ringing

Ringing (Alerting): Station is ringing with an Incoming call

Connected: Connected with remote party

Held: Remote party is on hold

Invalid: Remote party hangs up or an error occurs while attempting an outbound call

Busy: the line is being used by another station (shared lines only)

Shared Line (or Call) Appearances

SPA9x2 phones support shared line appearances in association with a Broadsoft application server. An extension can be shared by two or more stations. All call appearances on a shared extension are shared.

Linksys SPA9x2 Administration Guide

30

Image 37
Contents Linksys SPA9x2 Phone Administration Guide Table of Contents Provisioning Capabilities Setting System FeaturesSetting Regional Parameters Customizing SPA9x2 Extensions SPA9x2 Phone Field Reference 123 LED Script 181 LED Pattern 182 Appendix B Configuring a Dial Plan 183Read Me First Introducing Linksys SPA9x2 PhonesRead Me First Related Documentation Getting Started Basic Phone FeaturesGetting Started Additional Phone Features Additional Phone FeaturesSPS932 Sidecar Attendant for the SPA962 Features Requring SIP Support SPA9x2 Phone Configuration Scenarios SPA9x2 Phone Configuration ScenariosSPA9000 IP PBX System SPA9000 IP PBX SystemSPA400 SIP Over TCP Session Initiation Protocol and SPA9x2 PhonesSession Initiation Protocol and SPA9x2 Phones Using SPA9x2 Phones with a Firewall or Router Using SPA9x2 Phones with a Firewall or RouterSIP Proxy Redundancy Network Address Translation and SPA9x2 Phones Network Address Translation and SPA9x2 PhonesSession Border Controllers Routers and Service Provider Support of NATSIP-NAT Interoperation Simple Traversal of UDP Through NATs StunSimple Traversal of UDP Through NATs Stun Using SPA9x2 Phones in a Vlan Using SPA9x2 Phones in a VlanDetermining the Type of NAT Used on Your Router Introducing Linksys SPA9x2 Phones Determining SPA9x2 Firmware Version Getting StartedDetermining SPA9x2 Firmware Version Read this chapter to learn aboutUpgrading SPA9x2 Firmware Downloading the FirmwareDownloading the Firmware Using the Phone Display and Buttons Using the Phone Display and ButtonsSee Appendix a Creating an LED Script Using the Web User Interface Using the LCD ScreenUsing the Web User Interface Administrator and User ViewsAdministrator Privileges Using the Personal Directory Using the Personal DirectoryBasic and Advanced Views SystemViewing Call History Web Admin TabsCaller and Called Name Matching Viewing Call HistoryRoadmap to Web UI Features Roadmap to Web UI FeaturesSee , Setting Regional Obtaining Phone Information Info Tab Obtaining Phone Information Info TabProduct Information Notes System and Product InformationSystem and Product Information Understanding Lines, Calls, and Shared Call Appearances Phone Status InformationPhone Status Notes Phone Status InformationShared Line or Call Appearances Understanding ExtensionsUnderstanding Lines, Calls, and Shared Call Appearances Line Key LEDs Extension Status InformationExtension Status Information Extension Status Notes Line and Call Status InformationLine and Call Status Notes Line and Call Status InformationWhat’s Next? Downloaded Ring TonesRing Tone Notes Downloaded Ring TonesWhat’s Next? Setting Security Features Setting System FeaturesSetting Security Features SIP Initial Invite and MWI ChallengeSrtp and Securing Calls Supported Codecs Ensuring Voice QualityEnsuring Voice Quality Bandwidth Requirements Factors Affecting Voice Quality Setting System Features Setting System FeaturesSee the following sections System Configuration Notes Setting System Configuration InformationSetting System Configuration Information Setting a Static IP Address on the IP Phone Setting Internet, IP and PPPoE InformationSetting Internet, IP and PPPoE Information Dhcp and PPPoE NotesOptional Network Configuration Notes Setting Optional Network ParametersSetting Optional Network Parameters HostName Enter the host name of the SPA9x2 phoneVlan Settings Notes Configuring Vlan SettingsConfiguring Vlan Settings SIP Parameters Setting SIP ParametersSIP Parameters Following table describes all SIP parameters SIP Parameter NotesSee , Using the SPA932 Sidecar SIP Timer Notes SIP Timer ValuesSIP Timer Values SIP T4 Response Status Code Handling Response Status Code HandlingResponse Status Notes RTP ParametersRTP Notes RTP ParametersSDP Payload Types Defaults to blankNAT Support Parameters SDP Payload ParametersNAT Support Parameter Notes Linksys Key System ParametersLinksys Key System Notes Linksys Key System ParametersProvisioning Basics Service provider documentationProvisioning Capabilities Provisioning CapabilitiesProvisioning Configuration from Phone Keypad SPA9x2 Configuration ProfilesSPA9x2 Configuration Profiles Flat-profile AdminPasswdsome secret/AdminPasswdUpgrading, Resyncing, and Rebooting Phones Upgrading, Resyncing, and Rebooting PhonesUpgrading Firmware on a Phone Resyncing a Phone Rebooting a PhoneRetail Provisioning Redundant Provisioning ServersRedundant Provisioning Servers Using Https Configuration Access ControlAutomatic In-House Preprovisioning Automatic In-House PreprovisioningUsing Https Firmware Upgrade ParametersHow Https Works Server CertificatesCounts down to zero Sample Configuration File Sample Configuration FileFollowing is a sample configuration file General Purpose ParametersSetting Regional Parameters Example 1 Normal Ring Setting Regional Parameters Example 3 SIT Tone Call Progress Tones Notes Call Progress TonesCall Progress Tones Control Timer Value Notes Control Timer Values secDistinctive Ring Patterns Ring Pattern NotesVertical Service Activation Codes Star Codes Vertical Service Activation Codes Star CodesVertical Service Activation Code Notes Setting Regional Parameters Using Star Codes to Activate/Deactivate Services Disabling/Deactivating Services Vertical Service Announcement CodesVertical Service Announcement Codes Vertical Service Announcement Notes SAmap syntax SAserv=SAextcode Outbound Call Codec Selection Codes Miscellaneous ParametersOutbound Call Codec Selection Notes Miscellaneous ParametersDtmf Notes Managing the Time and Date Localizing Your SPA9x2 PhoneLocalizing Your SPA9x2 Phone Configuring Daylight Savings Time Selecting a Language Selecting a LanguageCreating a Dictionary Server Script For example DictionaryServerScript ua=na General Phone Information Customizing SPA9x2 PhonesGeneral Phone Notes General Phone InformationBackground SPA942/962 section on Changing the Display Background SPA942/962 Using the Photo Album Feature on the SPA962Line Key Information Configuring Shared Line Extension on SPA9x2 PhonesLine Key Notes Line Key InformationLine Key LED Pattern Notes Miscellaneous Line Key Settings NotesParameters Description Supplementary Services Notes Supplementary Services ParametersSupplementary Services Parameters Abbreviations are spelled out in the following tableVoice conversation is encrypted so that others cannot Using Call Parking Using Group PagingUsing Call Pick Up and Group Call Pick Up Ring Tone Parameters Ring Tone ParametersManaging Ring Tones Using Extension Mobility Audio Input Gain dB and Extension Mobility SettingsAudio Input Gain dB and Extension Mobility Settings Extension Mobility NotesGeneral, Shared Line Appearance, and NAT Settings General, Shared Line Appearance, and NAT SettingsCustomizing SPA9x2 Extensions General Parameter NotesNAT Settings Notes Network Settings Notes Network Settings and SIP SettingsSIP Settings Notes Network Settings and SIP SettingsSelect no Call Feature Notes Call Feature SettingsCall Feature Settings Proxy and Registration Parameters Proxy and Registration ParametersConfiguring a SIP Proxy Server Configuring a SIP Proxy ServerEnter your service provider name in the Proxy field Subscriber Information Parameters Audio Configuration ParametersSubscriber Information Notes Subscriber Information ParametersAudio Configuration Parameters Audio Configuration Notes Dial Plan Parameters Dial Plan ParametersThis table describes all Dial Plan parameters Dial Plan NotesHandling Call Forward and Speed Dial Parameters Customizing UsersCall Forward Notes Speed Dial NotesSupplementary Services Supplementary ServicesWeb Information Service Settings SPA962 Only Setting RSS Newsfeeds on the SPA962 PhoneSetting RSS Newsfeeds on the SPA962 Phone You can also configure web services on the web UIWeb Information Service Notes Audio Volume SettingsTraffic Information Settings Audio Volume NotesPhone GUI Color Settings SPA962 Only Phone GUI Color Settings SPA962 OnlyPhone LCD Notes Using the SPA932 Sidecar Setting Up the SPA932 Sidecar Setting Up the SPA932 SidecarFollowing table describes SPA932 LED colors Configuring the Broadsoft Server for the SPA932 Configuring the SPA9000 for the SPA932Home Configuring the Asterisk Server for the SPA932Configuring the SPA932 Unit/Key Configuration Scripts SPA9000 Syntax Asterisk syntax SPA932 Parameter NotesSPA932 Unit Monitoring Notes Monitoring the SPA932Monitoring the SPA932 Line Station Subscribe Info Tab SPA9x2 Phone Field ReferenceSystem Information Info TabPhone Status Product InformationElapsed Time Ext StatusExample, 25 days PacketsLine /Call Status System Tab System ConfigurationDownloaded Ring Tone System TabPPPoE Settings Internet Connection Type and Static IP SettingsOptional Network Configuration SIP Tab Vlan SettingsSIP Parameters SIP TabThere is no default this indicates SPA9x2 does not Defaults to $VERSIONDefaults to application/dtmf-relay Defaults to noID for registration after the next software reboot. Call-ID for registration after the next software reboot. IfRegistration after a power-cycle, regardless of this SettingSIP Timer Values sec Response Status Code Handling SIT3 Tone Defaults to blank SIT2 Tone Defaults to blankLimit on Icmp errors Defaults to RTP ParametersMs,LA=delay in ms,DU=call duration Call Round Trip Delay value ms in the InfoRtcp Tx Interval Send out compound Rtcp packet on the connectionRTP-Start-Loopback Dynamic Payload SDP Payload TypesRTP-Start-Loopback Codec Linksys SPA9x2 Phone Administration Guide 138 Insert VIA received NAT Support ParametersResponses if the received-from IP and VIA sent-by IP VIA sent-by port. Select yes or no from the dropLinksys Key System Parameters Regional Tab Provisioning TabCall Progress Tones Provisioning TabRegional Tab Defaults to 985@-16,1371@-16,1777@-1620.380/0 Defaults to 914@-16,1371@-16,1777@-1620.380/0Cfwd Dial Tone Played when all calls are forwarded Defaults to 350@-1920.1/.1/1,.1/9.7/1Cadence Distinctive Ring PatternsVertical Service Activation Codes Control Timer Values secDefaults to *90 Defaults to *66Defaults to *92 Removes caller ID blocking on the next inbound call Defaults to *82Linksys SPA9x2 Phone Administration Guide 148 Referral Services Codes One or more *code can be configured into this Feature Dial Services CodesFeature allows the proxy to process features like call Vertical service codes internally processed byVertical Service Announcement Codes Defaults to *0172624 Defaults to *0272616Defaults to *0272624 Defaults to *0172632Miscellaneous Defaults to GMT-0800Four digits GMT+1300Weekday value equals any value in the range Daylight Saving Time RulePhone Tab Phone TabGeneral Service provider often hosts a voice mail service.Advantages of hosted voicemail include Other words it is private Line KeyLine Key LED Pattern Miscellaneous Line Key SettingsLeaving this entry blank indicates the default value Default value of c=rp=fEntry blank indicates the default value of c=r Blank indicates the default value of c=aIndicates the default value of c=rp=s Supplementary ServicesRegistering LED 4, 5, or Ring ToneAuto Input Gain dB Extension Mobility Ext TabExt Tab Speakerphone Input GainDefaults to shared Shared, regardless the setting of Share CallShare Line Appearance Are shared or privateNetwork Settings NAT SettingsSIP Settings Delay, enter the appropriate period of time in seconds Referor Bye DelayRefer-To Target Contact Referee Bye Delay It responds with the message, unsupported. EnterLog. Choices are as follows Defaults to noneNone-No logging Line-Logs the start-line only for all messagesCall Feature Settings State Agent Reserved feature Cfwd Notify Serv Default RingSending of a Notify to the phone when a call is Or UserProxy and Registration Subscriber Information For establishment of a secure call Audio ConfigurationG723 Enable G729a EnableG726-16 Enable G726-24 EnableDial Plan User TabUser Tab Call Forward Defaults to voice mailSpeed Dial BusyTraffic Service Information Settings SPA962 Web Information Service Settings SPA962Audio Volume Phone GUI Menu Color Settings SPA962 onlyTab SPA962 only Light Green Pink Silver Defaults to Light BlueTab SPA962 only This tab includes the following sectionsUnit SPA932 StatusSPA932 Status Sidecar unit Creating an LED Script Color is green and pattern is steady on defaultColor is red and pattern is slow blink LED is offLED Pattern Allows arbitrary 2-digit star code Configuring a Dial PlanDial Plan Rules Dial Plan Examples Dial Plan Timers Dial Plans US/Canada Contacts ContactsEU Contacts Support8060952NC-EW
Related manuals
Manual 29 pages 18.81 Kb Manual 5 pages 63.33 Kb Manual 5 pages 5.17 Kb