Linksys SPA962, SPA942, SPA922 manual SPA932 Status, Unit

Page 186

SPA9x2 Phone Field Reference

SPA932 Status

General

Parameter

Description

 

 

Subscribe Expires

Specifies how long the subscription remains valid. After the

 

specified period of time, elapses, the SPA932 initiates a new

 

subscription.

 

Defaults to 1800.

 

 

Subscribe Retry Interval

Specifies the length of time to wait to try again if subscription

 

fails.

 

 

Unit 1 Enable

Enables or disables the first SPA932 unit (each SPA962 can

 

have up to two SPA932s attached).

 

 

Subscribe Delay

Length of delay before attempting to subscribe.

 

Defaults to 1.

 

 

Unit 2 Enable

Enables or disables the second SPA932 unit (each SPA962 can

 

have up to two SPA932s attached).

 

 

Server Type

Selects the type of server used (SPA9000, Broadsoft, or

 

Askterisk).

 

 

Test Mode Enable

Enables or disables test mode. When test mode is enabled, the

 

LEDs are turned on when keys are pressed, going from off to

 

green to red, and back to off. In test mode, when all the

 

buttons on the sidecar are returned to off, all the keys become

 

amber. The SPA962 must be rebooted after the test is

 

completed.

 

 

Call Pickup Code

The star code used for picking up a ringing call.

 

Defaults to *98.

 

 

Unit 1 Key 1-32

Enter a strings that define the extension and other parameters

 

associated with each lighted button on the first SPA932 unit.

 

Keywords and values are case-sensitive. The configuration

 

script is described in ”Unit/Key Configuration Scripts”

 

section on page 118..

 

 

For more information, see ”Setting Up the SPA932 Sidecar” section on page 114.

Unit 2

See the description for Unit 1 above. Enter a strings that define the extension and other parameters associated with each lighted button on the second SPA932 unit. Keywords and values are case-sensitive. The configuration script is described in ”Unit/Key Configuration Scripts” section on page 118.

SPA932 Status

This page provides two tabs to display the status of up to two SPA932 units that are supported by a single SPA962:

Linksys SPA9x2 Phone Administration Guide

179

Image 186
Contents Linksys SPA9x2 Phone Administration Guide Table of Contents Setting System Features Provisioning CapabilitiesSetting Regional Parameters Customizing SPA9x2 Extensions SPA9x2 Phone Field Reference 123 Appendix B Configuring a Dial Plan 183 LED Script 181 LED Pattern 182Introducing Linksys SPA9x2 Phones Read Me FirstRead Me First Related Documentation Basic Phone Features Getting StartedGetting Started Additional Phone Features Additional Phone FeaturesSPS932 Sidecar Attendant for the SPA962 Features Requring SIP Support SPA9x2 Phone Configuration Scenarios SPA9x2 Phone Configuration ScenariosSPA9000 IP PBX System SPA9000 IP PBX SystemSPA400 Session Initiation Protocol and SPA9x2 Phones SIP Over TCPSession Initiation Protocol and SPA9x2 Phones Using SPA9x2 Phones with a Firewall or Router Using SPA9x2 Phones with a Firewall or RouterSIP Proxy Redundancy Network Address Translation and SPA9x2 Phones Network Address Translation and SPA9x2 PhonesRouters and Service Provider Support of NAT Session Border ControllersSimple Traversal of UDP Through NATs Stun SIP-NAT InteroperationSimple Traversal of UDP Through NATs Stun Using SPA9x2 Phones in a Vlan Using SPA9x2 Phones in a VlanDetermining the Type of NAT Used on Your Router Introducing Linksys SPA9x2 Phones Determining SPA9x2 Firmware Version Getting StartedDetermining SPA9x2 Firmware Version Read this chapter to learn aboutDownloading the Firmware Upgrading SPA9x2 FirmwareDownloading the Firmware Using the Phone Display and Buttons Using the Phone Display and ButtonsSee Appendix a Creating an LED Script Using the LCD Screen Using the Web User InterfaceAdministrator and User Views Using the Web User InterfaceAdministrator Privileges Basic and Advanced Views Using the Personal DirectoryUsing the Personal Directory SystemCaller and Called Name Matching Web Admin TabsViewing Call History Viewing Call HistoryRoadmap to Web UI Features Roadmap to Web UI FeaturesSee , Setting Regional Obtaining Phone Information Info Tab Obtaining Phone Information Info TabSystem and Product Information Product Information NotesSystem and Product Information Phone Status Notes Phone Status InformationUnderstanding Lines, Calls, and Shared Call Appearances Phone Status InformationUnderstanding Extensions Shared Line or Call AppearancesUnderstanding Lines, Calls, and Shared Call Appearances Extension Status Information Line Key LEDsExtension Status Information Line and Call Status Notes Line and Call Status InformationExtension Status Notes Line and Call Status InformationRing Tone Notes Downloaded Ring TonesWhat’s Next? Downloaded Ring TonesWhat’s Next? Setting Security Features Setting System FeaturesSetting Security Features SIP Initial Invite and MWI ChallengeSrtp and Securing Calls Ensuring Voice Quality Supported CodecsEnsuring Voice Quality Bandwidth Requirements Factors Affecting Voice Quality Setting System Features Setting System FeaturesSee the following sections Setting System Configuration Information System Configuration NotesSetting System Configuration Information Setting Internet, IP and PPPoE Information Setting Internet, IP and PPPoE InformationSetting a Static IP Address on the IP Phone Dhcp and PPPoE NotesSetting Optional Network Parameters Setting Optional Network ParametersOptional Network Configuration Notes HostName Enter the host name of the SPA9x2 phoneConfiguring Vlan Settings Vlan Settings NotesConfiguring Vlan Settings Setting SIP Parameters SIP ParametersSIP Parameters SIP Parameter Notes Following table describes all SIP parametersSee , Using the SPA932 Sidecar SIP Timer Values SIP Timer NotesSIP Timer Values SIP T4 Response Status Code Handling Response Status Code HandlingRTP Notes RTP ParametersResponse Status Notes RTP ParametersNAT Support Parameters Defaults to blankSDP Payload Types SDP Payload ParametersLinksys Key System Notes Linksys Key System ParametersNAT Support Parameter Notes Linksys Key System ParametersProvisioning Capabilities Service provider documentationProvisioning Basics Provisioning CapabilitiesSPA9x2 Configuration Profiles SPA9x2 Configuration ProfilesProvisioning Configuration from Phone Keypad Flat-profile AdminPasswdsome secret/AdminPasswdUpgrading, Resyncing, and Rebooting Phones Upgrading, Resyncing, and Rebooting PhonesUpgrading Firmware on a Phone Rebooting a Phone Resyncing a PhoneRedundant Provisioning Servers Retail ProvisioningRedundant Provisioning Servers Automatic In-House Preprovisioning Configuration Access ControlUsing Https Automatic In-House PreprovisioningHow Https Works Firmware Upgrade ParametersUsing Https Server CertificatesCounts down to zero Following is a sample configuration file Sample Configuration FileSample Configuration File General Purpose ParametersSetting Regional Parameters Example 1 Normal Ring Setting Regional Parameters Example 3 SIT Tone Call Progress Tones Call Progress Tones NotesCall Progress Tones Distinctive Ring Patterns Control Timer Values secControl Timer Value Notes Ring Pattern NotesVertical Service Activation Codes Star Codes Vertical Service Activation Codes Star CodesVertical Service Activation Code Notes Setting Regional Parameters Using Star Codes to Activate/Deactivate Services Vertical Service Announcement Codes Disabling/Deactivating ServicesVertical Service Announcement Codes Vertical Service Announcement Notes SAmap syntax SAserv=SAextcode Outbound Call Codec Selection Notes Miscellaneous ParametersOutbound Call Codec Selection Codes Miscellaneous ParametersDtmf Notes Localizing Your SPA9x2 Phone Managing the Time and DateLocalizing Your SPA9x2 Phone Configuring Daylight Savings Time Selecting a Language Selecting a LanguageCreating a Dictionary Server Script For example DictionaryServerScript ua=na General Phone Notes Customizing SPA9x2 PhonesGeneral Phone Information General Phone InformationBackground SPA942/962 section on Using the Photo Album Feature on the SPA962 Changing the Display Background SPA942/962Line Key Notes Configuring Shared Line Extension on SPA9x2 PhonesLine Key Information Line Key InformationMiscellaneous Line Key Settings Notes Line Key LED Pattern NotesParameters Description Supplementary Services Parameters Supplementary Services ParametersSupplementary Services Notes Abbreviations are spelled out in the following tableVoice conversation is encrypted so that others cannot Using Group Paging Using Call ParkingUsing Call Pick Up and Group Call Pick Up Ring Tone Parameters Ring Tone ParametersManaging Ring Tones Audio Input Gain dB and Extension Mobility Settings Audio Input Gain dB and Extension Mobility SettingsUsing Extension Mobility Extension Mobility NotesCustomizing SPA9x2 Extensions General, Shared Line Appearance, and NAT SettingsGeneral, Shared Line Appearance, and NAT Settings General Parameter NotesNAT Settings Notes SIP Settings Notes Network Settings and SIP SettingsNetwork Settings Notes Network Settings and SIP SettingsSelect no Call Feature Settings Call Feature NotesCall Feature Settings Proxy and Registration Parameters Proxy and Registration ParametersConfiguring a SIP Proxy Server Configuring a SIP Proxy ServerEnter your service provider name in the Proxy field Subscriber Information Notes Audio Configuration ParametersSubscriber Information Parameters Subscriber Information ParametersAudio Configuration Parameters Audio Configuration Notes Dial Plan Parameters Dial Plan ParametersDial Plan Notes This table describes all Dial Plan parametersHandling Call Forward Notes Customizing UsersCall Forward and Speed Dial Parameters Speed Dial NotesSupplementary Services Supplementary ServicesSetting RSS Newsfeeds on the SPA962 Phone Setting RSS Newsfeeds on the SPA962 PhoneWeb Information Service Settings SPA962 Only You can also configure web services on the web UITraffic Information Settings Audio Volume SettingsWeb Information Service Notes Audio Volume NotesPhone GUI Color Settings SPA962 Only Phone GUI Color Settings SPA962 OnlyPhone LCD Notes Using the SPA932 Sidecar Setting Up the SPA932 Sidecar Setting Up the SPA932 SidecarFollowing table describes SPA932 LED colors Configuring the SPA9000 for the SPA932 Configuring the Broadsoft Server for the SPA932Configuring the Asterisk Server for the SPA932 HomeConfiguring the SPA932 Unit/Key Configuration Scripts SPA9000 Syntax SPA932 Parameter Notes Asterisk syntaxMonitoring the SPA932 SPA932 Unit Monitoring NotesMonitoring the SPA932 Line Station Subscribe System Information SPA9x2 Phone Field ReferenceInfo Tab Info TabProduct Information Phone StatusExample, 25 days Ext StatusElapsed Time PacketsLine /Call Status Downloaded Ring Tone System ConfigurationSystem Tab System TabInternet Connection Type and Static IP Settings PPPoE SettingsOptional Network Configuration SIP Parameters Vlan SettingsSIP Tab SIP TabDefaults to application/dtmf-relay Defaults to $VERSIONThere is no default this indicates SPA9x2 does not Defaults to noRegistration after a power-cycle, regardless of this Call-ID for registration after the next software reboot. IfID for registration after the next software reboot. SettingSIP Timer Values sec Response Status Code Handling Limit on Icmp errors Defaults to SIT2 Tone Defaults to blankSIT3 Tone Defaults to blank RTP ParametersRtcp Tx Interval Call Round Trip Delay value ms in the InfoMs,LA=delay in ms,DU=call duration Send out compound Rtcp packet on the connectionSDP Payload Types RTP-Start-Loopback Dynamic PayloadRTP-Start-Loopback Codec Linksys SPA9x2 Phone Administration Guide 138 Responses if the received-from IP and VIA sent-by IP NAT Support ParametersInsert VIA received VIA sent-by port. Select yes or no from the dropLinksys Key System Parameters Call Progress Tones Provisioning TabRegional Tab Provisioning TabRegional Tab Cfwd Dial Tone Played when all calls are forwarded Defaults to 914@-16,1371@-16,1777@-1620.380/0Defaults to 985@-16,1371@-16,1777@-1620.380/0 Defaults to 350@-1920.1/.1/1,.1/9.7/1Distinctive Ring Patterns CadenceControl Timer Values sec Vertical Service Activation CodesDefaults to *66 Defaults to *90Defaults to *92 Defaults to *82 Removes caller ID blocking on the next inbound callLinksys SPA9x2 Phone Administration Guide 148 Referral Services Codes Feature allows the proxy to process features like call Feature Dial Services CodesOne or more *code can be configured into this Vertical service codes internally processed byVertical Service Announcement Codes Defaults to *0272624 Defaults to *0272616Defaults to *0172624 Defaults to *0172632Four digits Defaults to GMT-0800Miscellaneous GMT+1300Daylight Saving Time Rule Weekday value equals any value in the rangePhone Tab Phone TabService provider often hosts a voice mail service. GeneralAdvantages of hosted voicemail include Line Key Other words it is privateMiscellaneous Line Key Settings Line Key LED PatternEntry blank indicates the default value of c=r Default value of c=rp=fLeaving this entry blank indicates the default value Blank indicates the default value of c=aSupplementary Services Indicates the default value of c=rp=sRegistering LED Ring Tone 4, 5, orAuto Input Gain dB Ext Tab Ext TabExtension Mobility Speakerphone Input GainShare Line Appearance Shared, regardless the setting of Share CallDefaults to shared Are shared or privateNAT Settings Network SettingsSIP Settings Refer-To Target Contact Referee Bye Delay Referor Bye DelayDelay, enter the appropriate period of time in seconds It responds with the message, unsupported. EnterNone-No logging Defaults to noneLog. Choices are as follows Line-Logs the start-line only for all messagesCall Feature Settings Sending of a Notify to the phone when a call is Default RingState Agent Reserved feature Cfwd Notify Serv Or UserProxy and Registration Subscriber Information Audio Configuration For establishment of a secure callG726-16 Enable G729a EnableG723 Enable G726-24 EnableUser Tab Dial PlanUser Tab Speed Dial Defaults to voice mailCall Forward BusyAudio Volume Web Information Service Settings SPA962Traffic Service Information Settings SPA962 Phone GUI Menu Color Settings SPA962 onlyTab SPA962 only Light Green Pink Silver Defaults to Light BlueTab SPA962 only This tab includes the following sectionsSPA932 Status UnitSPA932 Status Sidecar unit Color is red and pattern is slow blink Color is green and pattern is steady on defaultCreating an LED Script LED is offLED Pattern Configuring a Dial Plan Allows arbitrary 2-digit star codeDial Plan Rules Dial Plan Examples Dial Plan Timers Dial Plans EU Contacts ContactsUS/Canada Contacts Support8060952NC-EW
Related manuals
Manual 29 pages 18.81 Kb Manual 5 pages 63.33 Kb Manual 5 pages 5.17 Kb