ANSWERING AND MAKING CALLS
Indicate whether you want to connect a call with one user or several users in the computer’s VoIP software.
The Konftel 300W functions as a speaker and microphone for the computer.
Answering a VoIP call
Press 
.
The Konftel 300W has now been put into call mode and the LEDs show a steady blue light.
Indicate whether you want to start the call by answering in the computer’s VoIP software.
The Konftel 300W functions as a speaker and microphone for the computer.
Ending a VoIP call
End the call in the computer’s VoIP software and put the Konftel 300W on 
.
The Konftel 300W now only functions as a speaker for the computer.
CALLS VIA MOBILE PHONES
For these instructions, it is assumed that the Konftel 300W is connected to a mobile phone via a cable (optional accessory).
Select mobile as the telephone line
Press LINE MODE and select MOBILE as a phone line. Press OK to confirm.
The box in front of MOBILE is filled in which indicates that this connectivity option can be used for calls.
Other connectivity options can be deselected in the same way if they are not going to be used.
You can combine all available connectivity options.
Press the LINE MODE key again to close the line mode.
You can add another line, end a line or switch between connected lines during a call.
Making calls using a mobile phone
Press 
to activate Konftel 300W.
Dial the number on the mobile phone as you normally would.
The Konftel 300W now functions as a speaker and microphone for the mobile phone. The LEDs show a steady blue light.
Ending calls
Ending the call on the mobile phone.
Press 
to turn off the Konftel 300W.
15