Konftel 100/D manual Connecting to a PC, Connection to a PC

Page 8

CONNECTING TO A PC

230 V

PC/soundmains outlet card

MIC-IN

LINE-

OUT

Konftel 100/D

Only Tufvasson type PFLF15 or Dantrafo DT 14313 mains transform- ers may be used with Konftel 100/D.

Konftel 100/D is connected to a sound card on a PC as shown in the figure above.

NOTE:

To achieve full duplex speech communication, the PC sound card must support full duplex.

Perform the connection as follows:

1.Turn off the power to the PC.

2.Connect the Konftel 100/D to the soundcard with the enclosed Y-cable as shown.

NOTE: If the sound card does not have a mic input, the “line in” input should be used instead.

3.Turn on the power to your PC.

4.Connect the Konftel 100/D to the transformer and mains outlet.

Image 8

Contents User guide Conference unit Konftel 100/D Contents EnglishUpper side FeaturesSwitch box Underside Positioning Connection to Telephone Connection to telephoneSwitchbox Manufacturer Type of exchangeVolume Settings Telephone Volume settingsVolume settings for loudspeaker Volume settings for microphoneConnecting to a PC Connection to a PCSetting Volume with PC Volume settings for loudspeakersKEY SET Key functionsManual tuning Fine TuningAutomatic tuning Tape recorder output MUTE, Tape RecorderMute function Calling with Telephone Calling with telephoneIncoming calls GeneralCalling with PC Calling with PCTroubleshooting and Maintenance Telephone troubleshootingPC troubleshooting MaintenanceTechnical DATA, Accessories Main unitSwitch box AccessoriesPC Cables Spare parts