Lucent Technologies 8405 manual Select Ring and Ringer Volume, To select a personalized ring

To adjust the speakerphone to the surrounding room acoustics

1While on-hook, press Shift and then press

Speaker .

•You hear a series of tones.

SELECT RING (and RINGER VOLUME)

To select a personalized ring

1If your 8405 has a Shift button, press then press Hold ;

if your 8405 has a Ring button, press

• Current ringing pattern plays.

Shift

Ring

and

.

2To cycle through all eight ring patterns:

if your 8405 has a Shift button, continue to press (and then release) Hold to hear each subsequent pattern;

if your 8405 has a Ring button, continue to press (and then release) Ring to hear each new pattern.

NOTE: If your 8405 has a display, you can also press

Next or Prev to cycle through the eight ringing

patterns.

3To set your selected ringing pattern:

if your 8405 has a Shift button, press Shift when

you hear the desired ringing pattern;

if your 8405 has a Ring button, do not press Ring anymore. You will hear the selected ringing

pattern two more times, and then it will be automatically saved.

•You hear confirmation tone.

To adjust ringer volume if necessary (speaker is not active)

1To raise the volume, press the right half of the

Volume control button labeled ; to lower the volume, press the left half of the Volume control

button labeled .

SEND ALL CALLS

To send all calls (except priority calls) to coverage

1While on-hook, press softkey below SAC (for display users)

or Press Send Calls

or Dial Send All Calls access code _______.

7