Speakerphone

To cancel Send All Calls

1While on-hook, press softkey below SAC (for display users)

or Press Send Calls

or Dial Send All Calls cancel code _______.

SPEAKER

NOTE: All 8405B and 8405D sets have a one-way speaker only. If you have an 8405B Plus or an 8405D Plus, your voice terminal may be set for the Speaker or the Speakerphone feature. Check with your system manager.

To place/answer a call without lifting the handset, or to use the speaker with any listen-only feature

1Press

Speaker

2Place the call or access the selected feature.

3Adjust the speaker volume if necessary:

To raise the volume, press the right half of the Vol-

ume control button labeled ; to lower the vol- ume, press the left half of the Volume control

button labeled .

4Pick up the handset to talk to the other party.

To change from the speaker to the handset

1Pick up the handset and talk.

To change from the handset to the speaker

1While the handset is off-hook, press Speaker

2Hang up the handset.

To end a call using the speaker

1 Press Speaker .

NOTE: To use this feature, you must be using an 8405B Plus or 8405D Plus and your voice terminal must be set for the Speakerphone (speak and listen) feature.

To place/answer a call without lifting the handset, or to use speakerphone with any feature

1Press

Speaker

2Place or answer call, or access selected feature.