Lucent Technologies 610 Activate/deactivate the Key tones, Activate/deactivate the Warning tones

Page 22

Programming your telephone

•Locking the keypad:

OK		Ok
OK	OK	Lock Keys

•Lock the keypad automatically:

you can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.

6.13 Activate/deactivate the Key tones

By default the set emits a tone each time a key is pressed.

To deactivate these tones:

OK

OK

Phone Settings

OK

OK

Key Tones

OK

OK		Ok
OK	OK	Keypad autolock

•Unlocking the keypad:

OK

select the time period before the automatic locking



Enable Tones	OR		Desable Tones	OK

#

6.12 Configure the set according to the background noise (Noise mode)

This function is used to configure the set to obtain optimal listening conditions depending on the background noise.

OK

OK

Phone Settings

OK

OK

Noise mode

OK

OK

select the

ambient

volume level

•Normal: corresponds to most office environments.

•High: corresponds to an average level of background noise.

•Severe: corresponds to an extremely high level of background noise.

6.14 Activate/deactivate the Warning tones

The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.). To deactivate these tones:

OK

OK

Phone Settings

OK

OK

Warning Tones

OK



Enable Tones	OR		Desable Tones	OK

22

Image 22

Contents Handset Page How to use this guide IntroductionPage Contents Getting to know your telephone Using your telephone Make a call using the personal phone bookMake a call-back request to a busy number Using your telephoneSending Dtmf signals Mute, so that your correspondent cannot hear youAnswering a second call during a conversation Switching between calls Broker callDuring a conversation Making a second call during a conversationPlacing a call on hold hold During a conversationConference Placing an outside call on hold parkingIntrusion into an internal conversation Adjust audio volumeProtection against intrusion Call pick-up 3SharingAnswering the general bell Hunting groupsCalling a correspondent on his/her loudspeaker SharingAnswering a call on your pager Sending a written message to an internal correspondentPersonal code Send a voice message to a destinationSend a voice message copy Spell the addressees nameDiverting calls to another number immediate diversion Diverting your calls to your voice message serviceKeep in touch While listening to messages, you canKeep in touch Cancelling all diversionsDiverting calls when your line is busy divert if busy Do not disturbTo complete Message Leaving a recorded message for internal callersConsulting written messages To consultManaging your charges Charging your calls directly to business accountsModify the password for your phone set Programming your telephoneProgram a non-programmed entry in the personal phone book Adjusting screen brightnessProgramming your telephone Selecting languageLock / unlock your telephone Programming an appointment reminderModify a programmed entry in the personal phone book Locking the keypad Activate/deactivate the Key tonesActivate/deactivate the Warning tones Lock the keypad automaticallyBatteries Batteries and chargersDesktop Charger Dual Chargers Cleaning the ChargersBatteries and chargers Gang Charger only on Mobile IP Touch 610 WlanPush to Talk IP Touch 610 Wlan Change PTT volume Adjusting the volume level of the tonesPush to Talk IP Touch 610 Wlan „ Declaration of compliance Guarantee and clauses„ Precautions for use „ Information relative to the environment