Lucent Technologies 308/616 installation instructions Mount Jack Panel Boxes

Page 11

■Mount Jack Panel Boxes

Mount the jack panel boxes near the controller, creating a “jack field.” You will need one jack panel box for every six telephones in your system. Ideally, the jack field will be two to six inches below the controller if the controller is wall-mounted.

Mounting screws for the jack panel boxes are included in the kit. If you are installing the boxes on a sturdy supporting structure, such as studs or cross members, attach the boxes directly to the walls. If the walls are hollow, mount the jack panel boxes on a board that is about two inches larger all around than the complete jack field (all the boxes mounted together). Then, mount the board on the wall.

Mount the jack panel box with

the screws provided or fasteners appropriate for your walls.

Mesh the tongue and groove of another jack panel box with the first. Mount the second box.

Black dot

Snap six modjack-to-modjack adapters into each jack retainer. Position the black dot on the left.

8 Customer Installation Instructions

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Spirit Page Information for the Telephone Company Table of Contents Controller Section IntroductionCheck Outlet Grounding Plan Your SystemMount Controller on Wall Mount ControllerConnect Telephone Lines to Controller Test the Incoming Telephone LinesWiring Runs Wiring Installation KIT Business 4-pair WiringMount Jack Panel Boxes Run Cable To All Telephone Locations Install Modular Connecting Blocks Typical cable installation for one telephone location Secure Telephone Wire Wiring Run, Using Customer Convenience WiringInstall Plugs Install Wire JunctionsTypical Installation Using Customer Convenience Wiring Wall Mount Install Telephone SetsRecord Installation Date Desk MountTesting The System Connect System To Wiring RunsTelephone Test Replacement Parts TroubleshootingOptional Accessories
Top Page Image Contents