4Dial outside number, extension, or feature access code you want to store (up to 24 digits).
5Press
#
.
6Repeat Steps 3 through 5 to program additional buttons.
7Hang up.
To place an AD call
1Pick up handset or press Speaker
2Press selected AD button.
.
To program/reprogram an outside number, extension, or feature access code into a personal list
1Pick up handset.
NOTE: For speakerphone users, press a call appearance button.
2Press softkey below Prog (for display users) or Press Program
or Dial AD Program access code ________.
3Dial Personal List number (1, 2, or 3).
4Dial list item (1, 2, 3...).
5Dial number you want to store (up to 24 digits).
6Press
#
.
7Repeat Steps 4 through 6 to program additional items on the same list.
8Hang up.
To place a call using an AD list button or access |
code |
1 Press Pers List or Grp List or Sys List |
or Dial appropriate AD List access code:
•List 1 __________
•List 2 __________
•List 3 __________
NOTE: An Enhcd List may also be available.
2Dial desired list item (1, 2, 3...).
2