Safety instructions for installation
The appliance must only be installed and connected to the electricity supply by a suitably qualified and competent person in strict accordance with current national and local safety regulations.
Fit the wall units and extractor hood before fitting the hob to avoid damaging the appliance.
The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C
Any backmoulds must be of
This appliance must not be used in a
The hob may not be built in over a fridge,
This hob must not be installed above ovens or cookers unless these have a
After installing the hob, ensure that the connection cable cannot come into contact with the underside of the appliance. Make sure that there is no mechanical obstruction, such as a drawer, which could damage it.
Observe carefully the safety distances given on the following pages.
All dimensions in this instruction booklet are given in mm.
52