Additional functions
Programming
You can change the default settings of the programme options (see chart). Several settings can be altered in succession.
After the programming mode has been called up, P (Programme), S (Status) and numbers will appear in the cooking zone displays. These show the current settings.
Once you have left the programming mode, the hob will be reset automatically. The process is completed when the booster indicator lights up briefly.
Do not switch the hob on again until the reset process is completed.
To call up the programming mode
With the hob switched off, touch the and B I/II sensors at the same time until the relevant indicator lamp flashes.
To set a programme / status setting
Hobs with 4 or more cooking zones
Touch the sensor for selecting the front left cooking zone.
Hobs with 3 cooking zones
Touch the sensor for selecting the left cooking zone.
Touch the + or - sensor to set the required Programme.
Touch the sensor for the front right cooking zone.
Touch the + or - sensor to set the required Status setting (see chart).
To save settings
Touch the sensor until all the displays go out.
To not save settings
Touch the B I/II sensor until all the displays go out.
44
