Lennox Hearth JX20 manual What the lights mean, Multipoint function, To use multipoint function

What the lights mean

What you see		What this means about your
		headset
Solid light		The headset is in pairing
		mode
Quick flash every 5 seconds		Connected and not on active
for 1 minute		call (reappears if you have
		asked for battery status)
LED flashing for 1 second,		Incoming call
then 1½ second pause then
repeats
LED flashing twice and then		Pairing succeeded
turning off
LED flashes	once then solid	Pairing failed
white
LED flashes	once	0-25% charged
LED flashes twice		25-50% charged
LED flashes three times		50-75% charged
LED flashes four times		75%-100% charged
LED soild white		Fully charged

Multipoint function

The Jabra JX20 Pura is capable of having two mobile phones (or other Bluetooth devices) connected to the headset at the same time.. This will give you the freedom of having only one headset for both of your mobile phones..

To use multipoint function:

•Pair and connect phone A (see automatic pairing section)..

•Pair and connect phone B (or other Bluetooth device)..

english

Jabra JX20 Pura