Turning your headset on and off

Charging your headset from your deskstand:

What you see	What this means

LED off	No device in deskstand

1st.. LED solid	Device in deskstand

1st.. LED solid, 2nd.. LED pulsing	0-25% charged

1+2 LED solid, 3rd.. LED pulsing	25-50% charged

1+2+3 LED solid, 4th.. LED pulsing	50-75% charged

1+2+3 +4 LED solid, 5th.. LED pulsing	75-100% charged

All LED´s solid	Fully charged

Check Battery status:

•When you are not in a call, tap either volume button..The LED will flash in accordance with the AC adapter/USB charger sequence above..

•Gently turn the earpiece 90° clockwise to turn on the headset (see fig.. 1)..

•Gently turn the earpiece 90° anti-clockwise to turn off the headset (see fig.. 1)..

Pairing it with your phone

The first time you turn on your Jabra JX20 Pura it will automatically enter pairing mode.. In this case skip directly to point 2 below.. When pairing with a second device, or if you need to pair manually, start with point 1 below..

1.Put the headset in pairing mode:

• Turn the headset on..

•Press and hold the answer / end button until the LED on the back shines continuously..

english

Jabra JX20 Pura