Jwin JT-P570 owner manual Installation Easy SET UP, TONE/PULSE Selector, Ringer HI/LOW/OFF

Page 5

INSTALLATION

EASY SET UP

Use the coiled cord to connect the receiver to the base or console.

Use the flat cord to connect the phone base to the wall jack.

Open the battery cover (on the bottom of the phone base) and install 4 “AA” batteries (not included).

Note: Without batteries the phone will still dial and receive calls. However, the memory functions will not operate.

TONE/PULSE SELECTOR

Select the type of dialing that you desire or that your telephone requires:

TONE

The unit will operate using tone dialing.

PULSE

The unit will dial using rotary dial type pulses.

RINGER HI/LOW/OFF

When you don’t want to be disturbed by incoming calls slide the ringer switch to the “Low” or “Off” position.

LOW -- indicates that the ringer volume will be diminished but can still be heard.

OFF -- indicates that the ringer volume is turned off and there will be no sound to signal an incoming call.

12/30/20039:53 AM Page5

Image 5
Contents Operating Instructions JWINTable of Contents Features Pause Button DiagramRinger HI/LOW/OFF Installation Easy SET UPTONE/PULSE Selector USE Indicator Using the SpeakerphoneOperation Making Calls Receiving CallsHandsfree Speaker Volume Control Receiver Volume ControlRinger Volume Control Music ON-HOLD ButtonStoring Phone Numbers in TWO-TOUCH Memory Autodial Storing Phone Numbers in ONE-TOUCH Dial Memory M1/M2/M3Dialing a Number from 3-ONE Touch M1/M2/M3 Memories Dialing a Number from Autodial MemoryPlease read all instructions thoroughly Important Safety Instructions12/30/2003953 AM Page10 When you ship the product For Product ServiceProblem Send the unit to