Geemarc AMPLI1100 manual Introduction, Important Safety Instructions, Connecting the Telephone

Page 5

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a bath tub, wash bowl,kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS!

1 - CONNECTING THE TELEPHONE

1 - Connect the handset cord.

2 - Open the battery compartment by pulling back the latch.

3 - Insert correctly 4 x AAA 1.5V alkaline batteries (not supplied) in the battery compartment (*). Batteries are required if you wish to increase the ringer level up to 10 dB.

4 - Snap the battery door back in place.

5 - Connect the line cord to the socket (*).

(*) Classified TNV-3 according to EN60950 standard.

5

Image 5
Contents Page Contents Description Classified TNV-3 according to EN60950 standard Introduction Important Safety InstructionsConnecting the Telephone Ringer Settings SettingsTime Break Recall Switch 600/100 Setting UPTONE/PULSE Switch T/P Receiving Volume and Tone Adjustment Volume and Tone AdjustmentSending Volume Level Adjustment Using the Telephone Dialing Stored Numbers Storing Telephone NumbersRegulatory Compliance This equipment is hearing aid compatible Sonic Alert Inc., 1050 E. Maple Road, Troy MI Guarantee