Geemarc AMPLI1100 manual Setting UP, TONE/PULSE Switch T/P, Time Break Recall Switch 600/100

Page 7

SETTING UP

2 - TONE/PULSE SWITCH (T/P)

The Tone/Pulse switch is factory pre-set to Tone position (T). In the US,all telephone exchanges now use Tone dialling.If your phone does not dial out, it is probably being used from an older private switch- board (PBX). In this case,theTone/Pulse switch must be moved to Pulse.

3 - TIME BREAK RECALL SWITCH (600/100)

Check the Time Break Recall setting of your Ampli1100. For the US, the Time Break Recall should be set to 600 mS. It can be switched to 100 mS for other locations or PBX’s.

Image 7

Contents Page Contents Description Classiﬁed TNV-3 according to EN60950 standard Connecting the Telephone Important Safety InstructionsIntroduction Ringer Settings SettingsTONE/PULSE Switch T/P Setting UPTime Break Recall Switch 600/100 Receiving Volume and Tone Adjustment Volume and Tone AdjustmentSending Volume Level Adjustment Using the Telephone Dialing Stored Numbers Storing Telephone NumbersRegulatory Compliance This equipment is hearing aid compatible Sonic Alert Inc., 1050 E. Maple Road, Troy MI Guarantee