Magnadyne M11RF-LCD user manual Dome Light Supervision, Ignition Controlled Door Locks

Page 11

System Status Check (Continued)

1. First press the SET button on the transmitter, within 3 seconds press the buttons to activate outdoor driver paging function. The vehicle will then respond with chirps from the

horn/siren and a melody sound from the LCD transmitter. The

icon will then appear on the

LCD transmitter screen.

 

2.When the windshield knock sensor is activated, the vehicle will then respond with chirps from

the horn/siren and a melody sound from the LCD transmitter. The icon will then appear on the LCD transmitter screen.

3.A. Turn on the ignition switch or press the button to arm the system.

B. Press the button to disarm the system. This will then exit this function.

Dome Light Supervision

The Security System has a unique feature for using your vehicle’s dome light.

1.Upon disarming the vehicles security system, the interior dome light will remain on for thirty seconds.

2.If the security system is triggered, the dome light will flash for the same duration as the horn/siren.

Ignition Controlled Door Locks

If the vehicles door locks have been interfaced with the security system, the system will automatically lock the vehicle’s doors when the ignition key is turned to the “ON” position and or unlock the doors when ignition key is turned to the “OFF” position.

Channel 3: Trunk Release Output

Press and hold the button for two seconds to activate the trunk release (Channel 3 output) and/or any other devices connected.

Channel 4: Timer Control Output

Press and hold the and button at the same time to activate the Channel 4 output.

Channel 4 is user programmable output. You may program the built in timer to send a ground signal for any time duration from 1 second to 120 seconds.

Channel 5: Timer Control Output

Press and hold the and button at the same time to activate the Channel 5 output. Channel 5 is user programmable output. You may program the built in timer to send a ground signal for any time duration from 1 second to 120 seconds.

Channel 6: Timer Control Output

Press and hold the and button at the same time to activate the Channel 6 output. Channel 6 is user programmable output. You may program the built in timer to send a ground signal for any time duration from 1 second to 120 seconds.

Note: These timer outputs (4-6) may be used to turn on the Headlights, Power Windows or Power Sunroofs (Factory Settings are Momentary Outputs).

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Manual Then insert the new battery Remote Control TransmittersBattery Replacement System Function Remark Remote Control Transmitters OperationChirp Function Chirp IndicatorsLCD Display Transmitter Operations Flash Function LED DisplayParking Light Active Arming Lock & Arm Active Disarming Unlock & Disarm Trigger the System Exit the Valet ModeCar Locator Panic FunctionAnti-Car Jacking System Status Check Dome Light Supervision Channel 4 Timer Control OutputChannel 5 Timer Control Output Channel 6 Timer Control OutputRemote Start Operation To Operate the Vehicle While in the Remote Start FeatureTemporary Stop Feature Interior Temperature Check To Activate Turn Off Remote StartShut Down Input for Remote Starter InterferenceRemote LCD Icons Programming the LCD Transmitter Programming of the LCD TransmitterButton Description Timer SettingSet-Up Fixed Count Down Timer Out of Range IndicationDescription Replacement Parts and AccessoriesCredit Card or Money Order Only Parts and Accessories Order FormLimited Lifetime Warranty

M11RF-LCD specifications

The Magnadyne M11RF-LCD is an advanced multimedia receiver designed to enhance the in-car entertainment experience. It boasts a sleek and modern design that seamlessly integrates into various vehicle interiors while delivering high-quality audio and video performance. One of the standout features of the M11RF-LCD is its 11-inch LCD touchscreen display, which offers an intuitive user interface for easy navigation through its numerous functions and settings.

At the heart of the Magnadyne M11RF-LCD is its support for a wide range of media formats. The receiver can play CDs, DVDs, and digital files from USB drives, allowing passengers to enjoy their favorite music and movies on the go. The device also supports Bluetooth connectivity, enabling users to stream audio directly from their smartphones or other compatible devices while also facilitating hands-free calling for enhanced safety.

The M11RF-LCD is equipped with powerful built-in amplification, delivering robust sound quality that can fill the entire vehicle. It features adjustable equalizer settings, allowing users to customize their audio experience according to their preferences. The device also includes multiple preamp outputs, making it easier for users to connect external amplifiers or subwoofers for a more powerful sound system.

Another key characteristic of the Magnadyne M11RF-LCD is its multiple input options. It comes with AV in/out jacks and a rear camera input, promoting seamless integration with various additional accessories. The rear-view camera feature is particularly useful for enhancing safety while reversing, providing a clear view of the area behind the vehicle.

In terms of technology, the M11RF-LCD supports digital radio services, ensuring that users have access to a wide range of radio stations with improved sound quality. The receiver is also compatible with various smartphone integration features, allowing for easy access to apps and navigation directly through the touchscreen.

Overall, the Magnadyne M11RF-LCD stands out with its impressive display, versatile media playback capabilities, and user-friendly interface. It represents a significant step forward in the realm of in-car entertainment, offering a blend of functionality and aesthetics that appeals to modern drivers and passengers alike. Whether it’s for long road trips or daily commutes, the M11RF-LCD enhances the driving experience with its comprehensive features and high-quality output.
Top Page Image Contents