Magnadyne M11RF-LCD user manual Remote Start Operation, Temporary Stop Feature

Page 12

Remote Start Operation

To Remote Start Your Vehicle by Using the Remote Transmitter:

1.Press the button twice on the remote transmitter.

2.The parking lights will turn “ON” to indicate the remote start is activated.

3.The engine will start in approximately 5 seconds.

4.Once the engine is running, the parking lights will turn back on to indicate climate controls are activated to your pre-settings (While the vehicle is running, the “minute” digits will appear flashing on the LCD screen of the transmitter. It will indicate the count down timer based on the 5, 10, 20 or 30 minute run time set up by your installation center).

5.The vehicle will run for 5 to 30 minute cycles and automatically shut down (When the unit shuts off the count down timer will turn off and the transmitter will play a melody tune).

Note: The Remote Start unit will not start if any of these conditions exist:

1.The hood is opened.

2.The brake pedal is pressed.

3.Move the optional remote start enable toggle switch to “OFF” position (if installed).

4.The gear selector is in any gear other than “Park” or “Neutral”.

Safe Start (Child Safety Mode):

The factory default setting to remote start your vehicle is to press the button twice. If the child

safety mode has been activated, press the and the buttons at the same time to remote start the vehicle.

To Operate the Vehicle While in the Remote Start Feature:

1.Insert the Ignition key, turn it to the “ON” position “NOT THE START POSITION”.

2.Press the brake pedal.

Note: If the Brake Pedal is pressed before the key is in the “ON” position, the engine will automatically shut off.

Temporary Stop Feature:

This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time. This will keep the engine running for climate controls to stay on.

1.Before turning the engine off with the ignition key, press the button once. The LED will flash three times to indicate the feature is activated.

2.Turn the ignition key to the “OFF” position (the engine will stay running).

3.The engine will run until the pre-programmed time elapsed or shutdown input is received.

12

Image 12
Contents User’s Manual Remote Control Transmitters Battery ReplacementThen insert the new battery Remote Control Transmitters Operation System Function RemarkChirp Indicators LCD Display Transmitter OperationsChirp Function LED Display Parking LightFlash Function Active Arming Lock & Arm Active Disarming Unlock & Disarm Exit the Valet Mode Car LocatorPanic Function Trigger the SystemAnti-Car Jacking System Status Check Channel 4 Timer Control Output Channel 5 Timer Control OutputChannel 6 Timer Control Output Dome Light SupervisionTo Operate the Vehicle While in the Remote Start Feature Temporary Stop FeatureRemote Start Operation Interior Temperature Check Turn Off Remote Start Shut Down Input for Remote StarterInterference To ActivateRemote LCD Icons Programming of the LCD Transmitter Programming the LCD TransmitterTimer Setting Set-Up Fixed Count Down TimerOut of Range Indication Button DescriptionReplacement Parts and Accessories DescriptionParts and Accessories Order Form Credit Card or Money Order OnlyLimited Lifetime Warranty

M11RF-LCD specifications

The Magnadyne M11RF-LCD is an advanced multimedia receiver designed to enhance the in-car entertainment experience. It boasts a sleek and modern design that seamlessly integrates into various vehicle interiors while delivering high-quality audio and video performance. One of the standout features of the M11RF-LCD is its 11-inch LCD touchscreen display, which offers an intuitive user interface for easy navigation through its numerous functions and settings.

At the heart of the Magnadyne M11RF-LCD is its support for a wide range of media formats. The receiver can play CDs, DVDs, and digital files from USB drives, allowing passengers to enjoy their favorite music and movies on the go. The device also supports Bluetooth connectivity, enabling users to stream audio directly from their smartphones or other compatible devices while also facilitating hands-free calling for enhanced safety.

The M11RF-LCD is equipped with powerful built-in amplification, delivering robust sound quality that can fill the entire vehicle. It features adjustable equalizer settings, allowing users to customize their audio experience according to their preferences. The device also includes multiple preamp outputs, making it easier for users to connect external amplifiers or subwoofers for a more powerful sound system.

Another key characteristic of the Magnadyne M11RF-LCD is its multiple input options. It comes with AV in/out jacks and a rear camera input, promoting seamless integration with various additional accessories. The rear-view camera feature is particularly useful for enhancing safety while reversing, providing a clear view of the area behind the vehicle.

In terms of technology, the M11RF-LCD supports digital radio services, ensuring that users have access to a wide range of radio stations with improved sound quality. The receiver is also compatible with various smartphone integration features, allowing for easy access to apps and navigation directly through the touchscreen.

Overall, the Magnadyne M11RF-LCD stands out with its impressive display, versatile media playback capabilities, and user-friendly interface. It represents a significant step forward in the realm of in-car entertainment, offering a blend of functionality and aesthetics that appeals to modern drivers and passengers alike. Whether it’s for long road trips or daily commutes, the M11RF-LCD enhances the driving experience with its comprehensive features and high-quality output.