Magnadyne M11RF-LCD LCD Display Transmitter Operations, Chirp Indicators, Chirp Function

LCD Display Transmitter Operations

Transmitter Button						System Function	Remark
SET -				(C)		Systems Trigger Record Check	Press within
							3 Seconds
SET- SET -					(C)	System’s Status Check	Press within
							3 Seconds
SET -			=			Button Lock	Press within 3 Seconds and Hold
							“Lock” Button for 2 seconds
SET -		=				Optional Driving Pager	Press within
							3 Seconds
SET -	=					Monitor Interior Temperature	Press within
							3 Seconds
SET -	=					Daily Timer Start	Press within
							3 Seconds
SET						LCD Screen Lamp	Press and Hold for 1 Second
						Turns ON for 5 Seconds
SET-SET-SET						Clear the Flash Icon and Melody
						Sound on the LCD Screen Transmitter

Button Lock:

Button Lock is useful if you want to disable the transmission function of the remote control temporarily to prevent from any inadvertent pressing of buttons by others.

The regular remote control transmitter:

Press the button first, within 3 seconds press and hold the button for 2 seconds to activate or cancel the button lock function. The “LED” will pause flash for a few seconds to indicate the remote control transmitter is on “Button Lock” mode while pressing the transmitter button.

The 2-Way remote control transmitter:

Press the SET button first, within 3 seconds press and hold the button for 2 seconds to activate or cancel the button lock function.

Note: The icon will display on the LCD screen to show the remote transmitter is in “Button Lock” mode.

Chirp Indicators

Chirp		Function
1	Chirp	System is Armed
2	Chirps	System is Disarmed
3	Chirps	Defective Reminder
4	Chirps	Disarm / Triggered
5	Chirps	Car Locator

4