Attaching the Bracket for Desk USE

The plastic bracket should be installed correctly for proper desk use.

1. Arrange the bracket on the correct position of the bottom of the base, please note the arrow on the bracket.

2. Insert the two lower tabs on the bracket into the corresponding slots on the bottom of the base.

3. Push the two upper tabs on the bracket to insert them into the corresponding slots on the bottom of the base.

4. To separate the bracket from the base, push the two upper tabs on the bracket and pull the bracket out.

CONNECTING THE TELEPHONE

HANDSET

WALL JACK

REAR OF THE

TELEPHONE

SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE

You may need to set up the LCD contrast level, language, area code, time and date for your telephone when you power your phone for the first time or when you move to an area that has a different area code. Area code setting is necessary because the phone must distinguish local or long distance calls to properly dial calls from the Caller ID list.

Press and hold the DELETE button down, then press the DOWN button, the following will show in the display (FIG. 1). Release the DELETE button, press the UP or DOWN button to choose the LCD contrast level (1-5). Press the DELETE button to confirm and accept. In general, you can press the DISPLAY button directly to set the LCD contrast. Then the display will come to the language setting.

FIG. 1

FIG. 2

FIG. 3

The default language “E” (“E” = English; “F” = French; “S” = Spanish) will flash (FIG. 2). Press the UP or DOWN button to choose your desired language (flashing). Press the DELETE button to confirm and accept.

4IB-PH5562-WM-E-010807

IB-PH5562-WM-E-010807.pmd	5			1/23/2007, 5:08 PM