Grandstream Networks, Inc. |
Default Ring |
Tone |
Send Anonymous |
Anonymous |
Method |
Special Feature |
Syslog Server |
•By default “System Ring Tone” is selected. All calls received that do not match any “incoming caller ID” number will generate the selected ring tone
-system, 1, 2 or 3.
•The user can setup up one number on each of the ring tones 1, 2, and 3. When a call is received from one of these numbers, the respective ring tone will be generated.
•If the ring tone does not exist, the system default ring tone will be played. For
If this parameter is set to “Yes”, user ID will be sent as anonymous, essentially block the Caller ID from displaying.
This is decided by supported SIP server/proxy. Either “Use From Header” or “Use Privacy Header” depends on how SIP sever/proxy process the SIP header.
Default is Standard. Choose the selection to meet some special requirements from Soft Switch vendors like Nortel, Sonus, Broadsoft, etc. End user please do not touch this parameter.
The IP address or URL of System log server, especially useful for ITSP (Internet Telephone Service Provider). End user don’t encourage to touch this part
- 36 -