Grandstream Networks 100 Series user manual Grandstream Networks, Inc

Page 38

BudgeTone-100 User Manual

Grandstream Networks, Inc.

 

 

 

Firmware

Upgrade and

Provisioning

Firmware Server Path

Config Server Path

Firmware File Prefix

Firmware File Postfix

Config File Prefix

Config File

Postfix

Firmware upgrade and Provisioning can be done via either TFTP or HTTP. This is mutual exclusive choice.

Default if HTTP.

Via TFTP: (default is pointing to Grandstream Firmware TFTP server)

The TFTP server needs to be configured. If it is non-zero or not blank, the IP phone will attempt to retrieve new configuration file or new firmware from the specified TFTP server at boot time. It will make up to 3 attempts before timeout and then it will start the boot process using the existing code image in the Flash memory.

Be very careful when the TFTP is in progress (the phone’s LCD backlight will be ON). Do NOT interrupt the process (especially the power supply) otherwise might make the phone broken.

Be patient as in some network environment this process will take up to 15 minutes.

Via HTTP: (default is pointing to Grandstream Firmware HTTP server)

The URI for the web server used for firmware upgrade and configuration. For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.8.16

Here “:6688” is the specific TCP port that the HTTP server is listening to, it can be omitted if using default port 80.

IP address or domain name (URI) of firmware server. Default to Grandstream’s firmware server

IP address or domain name (URI) of configuration server. Default to Grandstream’s server. It can be different with Firmware server.

Default blank. If configured, the phone will request the firmware file with the prefix.

Useful for provisioning of ITSPs. End user should keep it blank.

Default is blank. Similar to Prefix. End user should keep it blank.

Default is blank. The phone will request configure file prefix is configured. Used by ITSP for provisioning. End user should keep it blank.

Default is blank. End user should keep it blank.

- 38 -

Image 38
Contents BudgeTone-100 Series Table of Contents Grandstream Networks, Inc Welcome Installation LCDInterconnection Diagram Warranty What is Included in the PackageSafety Compliances Key Features Product OverviewHardware Specifications Model BudgeTone-101 BudgeTone-102 Grandstream Networks, Inc Icon LCD Icon Definitions Basic OperationsGet Familiar with LCD/LED Get Familiar with Keypad Key Button Key Button DefinitionsMessage Make Phone Calls Make Calls using NumbersMake Calls using IP Address Call Hold Handset Mode, Speakerphone/Headset ModeAnswer an Incoming Call Call Waiting and Call FlashingAttended Transfer Call TransferBlind Transfer Conference Call Call Features Key Call FeaturesMenu Item Menu Functions Configuration GuideConfiguration with Keypad Display 7 G-711u Display 9 codE rEL Menu Item Menu Functions Configuration with Web Browser Access the Web Configuration MenuConfiguration Menu StatusNAT Basic Settings End User Password IP AddressGrandstream Networks, Inc Advanced Settings Advanced OptionsDefault Special Feature Syslog Server Syslog Level Grandstream Networks, Inc Grandstream Networks, Inc Grandstream Networks, Inc MWI Tone Default RingSpecial Feature Send AnonymousSyslog level Grandstream Networks, Inc Saving the Configuration Changes Rebooting the Phone from Remote Click to reloginConfiguration through a Central Server Upgrade through Tftp Software UpgradeUpgrade through Http Http//support.solarwinds.net/updates/New-customerFree.cfm Firmware and Configuration File Prefix and Postfix Managing Firmware and Configuration File DownloadRestore Factory Default Setting StepGlossary of Terms DSP DNSDid DtmfDhcp Echo CancellationFXS HttpMTU IP TelephonyIVR NTPRTP PstnRtcp SDPVlan UDPVAD VoIP