Grandstream Networks, Inc. | ||
|
|
|
End user Password
IP Address
Time zone
Day light savings time
Date display format
This contains the password for end user to access the Web Configuration Menu. This field is case sensitive and maximum length is 25 characters. The default end user password is “123”.
End user only has privilege to see the Status page and change parameters in Basic page. End user can NOT access to Advanced Settings pages and will get error message if try to.
There are 2 modes under which the IP phone can operate:
-If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory) and the IP phone will acquire its IP address from the first DHCP server it discovers on the LAN it attaches to.
. PPPoE account settings are configured here if the user is connecting the IP phone directly to the DSL/ADSL modem. Users can specify DNS server manually by entering DNS server’s IP address. The IP Phone will attempt to establish a PPPoE session if PPPoE account is set. For most users, just leave them blank
-If Static IP mode is selected, the IP address, Subnet Mask, Default Router IP address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields need to be configured. These fields are set to zero by default.
Displayed date/time will be adjusted according to the specified time zone.
Default NO. If set to Yes, then the displayed time will be 1 hour ahead of normal time.
This parameter controls the date display format.
- 28 -