Clarity RC200 Operation, Making phone calls Dialing on the keypad, Memory dialing from console

Page 11

a

CHAPTER 5 OPERATION

For optimum communication clarity, speak into the RC as close as possible, not to exceed 15 feet away. Keep the microphone free from obstructions. Do not speak at the same time as the other person. Also, adjust the volume control and set the ring volume to best suit your hearing needs.

B. Making phone calls

Dialing on the keypad

1.Press ON/OFF button and listen for dial tone.

MUTE FLASH/PAUSE

ON/OFF

HEADSET REDIAL

MIC

A. Programming numbers into memory

Your RC can store up to 20 numbers (two numbers per button) in its memory for fast, one–touch dialing.When programming, pressing the FLASH/PAUSE button between numbers inserts a 2 second pause in dialing.

To program a number into memory: 1. Press PROGRAM.

2.Dial the number on the keypad. (If no number is dialed within 7 seconds, DIALOGUE RC automatically dials the first number stored in memory location M1.)

Figure 11

 

M9

 

 

 

M10

 

 

 

VOL

MUTE

FLASH/PAUSE

OG

SCAN

HEADSET

ON/OFF

REDIAL

 

 

MIC

 

Figure 12

 

VOL

MUTE

PROG

SCAN

HEADSET

 

 

MIC

Figure 9

2. Dial the number (up to 40 digits).

 

M9

 

 

 

M10

 

 

 

VOL

MUTE

FLASH/PAUSE

ROG

SCAN

HEADSET

ON/OFF

REDIAL

 

 

MIC

 

Figure 10

3. Select the memory button to store this number, press once for first location, or twice for second location.When the number is programmed, it emits four "beeps" to confirm the number is stored.

4. If you make a mistake or want to change the number, repeat from step 1.

5. To erase a number, press PROGRAM, then FLASH/PAUSE, and then the corresponding memory location.

3.When finished, press the ON/OFF button to hang up.

Memory dialing from console

1. For the first number

 

M8

 

 

M9

 

stored in each memory

 

M10

 

 

 

 

button, press the

VOL

MUTE

FLASH/PAUSE

PROG

SCANMIC HEADSET

REDIAL ON/OFF

memory button once.

 

 

 

For the second number,

 

Figure 13

press the memory button twice. The indicator light on the directory shows the memory selected.

2.The number is dialed after a 3 second wait, allowing you time to change your selection.

3.When finished,

press the ON/OFF MUTE FLASH/PAUSE

button to hang up. MIC HEADSET REDIAL ON/OFF

Figure 14

6

Image 11
Contents RC200 Wall Mount Option Important Safety Instructions When the power supply cord or plug is frayed or damaged Additional Safety Notes for Canadian Users Table of Contents Your RC package includes the items as shown below Chapter Package ChecklistChapter Introduction Flash/Pause button On/Off button Redial button Chapter Features IdentificationMemory directory Memory buttons Power indicator Speaker Microphone Scan button Volume control Memory Program buttonRemote Transmitter Chapter InstallationBattery included with RC200 Speakerphone Setting up your RCChapter To program a number into memory 1. Press Program OperationMaking phone calls Dialing on the keypad Programming numbers into memoryAuto Dialing the first number stored in M1 From keypad Dialing by using the Scan buttonDialing using the Remote Transmitter Using the Remote TransmitterVoice Activated answering RC200 only ON/OFF indicator onVoice Mail Indicator VMI Unanswered Call IndicatorThis highly sen Chapter Optional AccessoriesPillow Switch Plugs into the console or the remote control Lapel MicrophoneQuick Start Guide Summary Press Remote Transmitter once to hang up Voice Activated answering Unanswered call indicator isIs off, RC200 only Ring volume set to Hi Chapter Case of Difficulty Symptom Cause and RemedyRemote Transmitter Replace remote cover and test Channel SettingsChapter Regulatory Information Chapter MaintenancePart 15 of FCC Rules Information Customer-Owned Coin/Credit Card PhonesIndustry Canada Technical Specifications Page Chapter Warranty Back-up battery Provided Chapter Feature SummaryFeature RC100 RC200 Or accessory switch
Related manuals
Manual 42 pages 26.74 Kb