Clarity RC200 Auto Dialing the first number stored in M1 From keypad, Within 7 seconds

CHAPTER 5 (CONTINUED)

Auto Dialing the first number stored in M1.

A. From keypad
1.	Press ON/OFF button or just press M1.
2.	The number is dialed automatically
	within 7 seconds.

The automatically

4. dials RCthe number selected.

Press the

5. button to ON/OFFhang up.

MUTE FLASH/PAUSE

ON/OFF

HEADSET REDIAL

MIC

Figure 16

B.	Using Remote Transmitter With Scan
	function on:
	1.	Press Remote Transmitter.
	2.	The number is dialed automatically
		after scanning all memories 3 times.
C.	With Scan function off:
	1.	Press Remote Transmitter.
	2.	The number is dialed automatically.

Dialing by using the SCAN button

Before you can use memory scanning for dial- ing, you must have the phone numbers stored in the memory first (page 6). To use memory scanning, the Scan function must be on. See Chapter 4 section C. Memory locations with no number stored are skipped. The memory directory is scanned three times or until a num- ber is selected. If no number is selected, the first number in M1 is dialed.

Dialing using the Remote Transmitter

A.	With Scan function on:
	1.	Press the Remote
		Transmitter to
		begin scanning.
	2.	When the desired	Figure 17
		memory location is lit, press the
		Remote Transmitter.The RC auto
		matically dials the number selected.
	3.	Press the Remote Transmitter once
		to hang up.
B.	With Scan function off:
	1.	Press the Remote Transmitter once.
	2.	It dials the first number stored in M1.

C.Answering phone calls

				1. Press the SCAN
	SCAN		HEADSET
PROG		MIC
VOL			MUTE

Figure 15

The memory location indicators light

Using the keypad

1.	When the phone rings,
	press the ON/OFF
	button to turn it on.
2.	When finished, press
	the ON/OFF button to
	hang up.

MUTE FLASH/PAUSE

ON/OFF

HEADSET REDIAL

MIC

Figure 18

2. up as it scrolls down the memory

locations. If you have : Only the first six memory locationsRC100are scanned. If

you have :All 20 memory loca- tions are scannedRC200(It "beeps" when

advancing to the next memory location.)

3.When the desired memory location is lit,

Using the Remote Transmitter

When the phone rings,

1. press the Remote Transmitter to turn on.

Press the remoteFigure 19

2. button once to hang up.

7