Volume Button, Redialbutton, Pausebutton

4.Press the desired memory location.

•To store in an auto memory button (located on right-hand side of base) - Press 1, 2, 3, or 10).

•To store in a keypad memory location - Press one of the keypad buttons (l, 2, 3, or 0).

5.Use pull out memory index to write in name and the memory button where it is stored.

To Dial A Phone Number In Memory

1. Lift the handset and wait for a dial tone.

2. Press any memory location.

• To dial an auto memory button (located on right-band side of base) - Press the desired auto memory button (1, 2, 3.... or 10).

• To dial a keypad memory location - press the MEM DIAL button first, and then the desired keypad button (1, 2, 3.... or 0).

3. The number will be displayed and dialed automatically.

VOLUME BUTTON

A built-in amplifier feature allows you to increase the listening volume in the receiver of the handset when speaking with your party. When needed, press the VOLUME button to achieve three different levels. The volume will go back to normal after you hang up the handset.

REDIALBUTTON

1. If the number you dialed is busy, or you want to call the last number dialed again, lift the handset, or press and release the hookswitch for a new dial tone.

2. Press REDIAL. The number will appear on the display window.

3. The last number called (31 digits maximum) will automatically be redialed.

PAUSEBUTTON

The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line.