Cortelco 2194**VOE27S instruction manual Telephone Usage, Set Up/Installation

Page 7

TELEPHONE USAGE

SET UP/INSTALLATION

1.Connect the adapter. Plug the large part of the adapter into the wall outlet and the adapter tip to the jack at the rear side of unit. (Use only 9V DC. 200mA, center positive Class 2 adapter.)

2.Connect the telephone line cord.

a.To connect without an answering machine.

•Use the new line cord to connect the PHONE jack of your new caller ID phone to the modular wall jack.

b.To connect with an existing answering machine.

•Use the existing line cord supplied to connect the LINE jack of your answering machine to the wall modular line jack.

•Use the new line cord supplied to connect the telephone’s jack of your new Caller ID phone to the PHONE jack of your answering machine.

•Set your answering machine to answer the phone after 2 or more rings.

3.Follow the procedure “Unit Setup” to set up your unit.

4.Place the unit on a flat table or mount it on a wall. If you desire to place it on a wall, use the wall mount bracket and short line cord supplied to accomplish the wall mounting.

4

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OWNER’S Instructionmanual Thank YOU For Purchasing Colleague Caller ID Type Table of Contents Page Importantsafetyinstructions 15-101-613 Telephone Usage SET UP/INSTALLATIONFactorypresets Unit SetupWall Mount Instructions Stand-By Screen Telephone Part Identification Placing a Phone Call Telephone FeaturesPulseandtonedialing Receiving a Phone CallAutomatic Memory TonebuttonRedialbutton Volume ButtonPausebutton Call Waiting Display HoldbuttonFlashbutton DataportMessagewaiting Message LightReceiving Calls RPTDeleting Calls Reviewing CallsPickup Phone Callback914 656 No Datasent MessageerrorPrivate Calls Unknowncalls Telephoneserviceproblems Message Error Happens Frequently Maintenance InformationTelephonerepair FCC Information Y, Z IndexTelephonenumbers Limitedwarranty
Top Page Image Contents