Cortelco 3220 instruction manual Redial/Pausebutton, Holdbutton, Flash Button

Page 15

to achieve four different levels. The volume remains the same between calls. It does not return to a nominal level.

REDIAL/PAUSEBUTTON

1. To redial one of the last 10 numbers dialed, press the REDIAL button. The dis- play will show the last number dialed. To scroll through the last 10 numbers, press the REVIEW UP ( ) button and REVIEW DOWN ( ) button.

2. After the desired number is selected, dial the number by pressing REDIAL again, lifting the handset, pressing the SPEAKER button or pressing the DIAL button.

3. The last number called (24 digits maximum) will automatically be redialed.

The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line.

1.Press the PAUSE button once and release at any point in the dialing sequence where a pause is desired.

2.The PAUSE button can be pressed more than once to create a longer pause.

HOLDBUTTON

1. To place a call on hold, press the HOLD button. The Line LED will then flash. Press the LINE button being used to release Hold.

2. To answer a call on the other line while speaking on one line. Place the current

line on hold. Press the ringing line button, Line 1 or Line 2. If you want the second call to join you in a three-way conference, press the CONF.

3. To place both calls on hold, press the hold button and both lines will be on hold at the same time. The Line/Hold LEDs will light. To cancel hold for only one line press the desired line button (Line 1/2). The other line will remain on hold.

FLASH BUTTON

This telephone provides a line break signal for accessing PABX service or for conve- nient use of Call Waiting from your local telephone company. If you have Call Waiting service, you can alternate the Call Waiting function per the following instructions.

1.While having a conversation, another party calls and you hear a tone.

2.Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered.

3.Press FLASH button again and release. The first caller can be spoken to again and the second call is placed on hold.

9

Image 15
Contents OWNER’S Instructionmanual Page Table of Contents Caller ID Features Importantsafetyinstructions Page Telephone Usage InstallationDesk Mount Instructions 24/90V Message Waiting LampUnit Setup FactorypresetsWall Mount Instructions Page Press Menu to confirm selection Telephone Part Identification Predial Telephone FeaturesReceiving a Phone Call Placing a Phone CallVolume Button MutebuttonAutomatic Memory REDIAL/PAUSEBUTTON HoldbuttonFlash Button Directorybutton HeadsetcompatibleReleasebutton Voicemail ButtonCaller ID Features Message LightMessagewaiting Reviewing Calls Receiving CallsCallback Deleting CallsOptionbutton No Datasent MessageerrorUnknowncalls Private CallsTo Store a New Number And Name Into The Directory UsingthedirectoryTelephoneserviceproblems Maintenance Information Telephonerepair FCC Information Limited Warranty