Cortelco 2205 instruction manual DIP Switch, Position, Off, Headsetcompatible, Line Voltage

DIP SWITCH

The DIP Switch located under the plastic memory index cover provides for:

a) Positive line disconnect option selection insures that any hookswitch depression disconnects the call.

b) A-Lead option selection used for special applications such as use with 1A2 Key Systems.

c) Handset or Headset option.

POSITION					ON
1)	Positive Line Disconnect				Yes
2)	A-Lead				Yes
3),4) Handset/Headset Option				See Below
Headset Option				Dip Switch 3
Handset Option				Dip Switch 4
		1	2	3	4
	ON
	OFF

OFF

No

No

See Below

Dip Switch 4

Dip Switch 3

Note: The current settings are in default position.

Note: Make sure the DIP switch is on default when using handset: Position 3 Off and Position 4 On.

HEADSETCOMPATIBLE

The DIP Switch must be located in the proper position for this feature to work. The headset can be turned on and off by using the handsfree button.

Note: DIP Switch must be in the proper position for the Headset feature to work.

LINE VOLTAGE

The Line voltage switch is located under the memory insert card. Standard line voltage is 48 Volts. Special settings require 24 Volts such as Key Systems. The default setting for Line 1 and Line 2 is 48 Volts.

Line 1 24 24 48

Line 2	Note: The current setting
24
	is default position.
48
48

14