Cortelco 2205 instruction manual Wall Mount Instructions, Telephone Initialization

Page 9

WALL MOUNT INSTRUCTIONS

1. Install wall mount bracket in wall mount position and route cords as shown in diagram below.

2. Connect the line cord. See Step 1 on preceding page for specific instructions.

3. Push out the handset hook and reattach in opposite direction for the wall mount position, plug the coiled cord into the handset, and then plug the other end of the cord into the base.

4. Place the handset on the base.

 

Wall

Wall

Desk

 

 

Jack

Wall Mounting

 

Wall Jack

Bracket Position

 

 

Mounting Views

 

 

Desk Top

Wall Mount

Position

Position

TELEPHONE INITIALIZATION

Lift the handset to allow telephone initialization and listen for dial tone. When you hear dial tone, your telephone is ready to use. If you do not hear dial tone, repeat this process to obtain dial tone.

7

Image 9
Contents OWNER’S Instructionmanual Page Table of Contents Importantsafetyinstructions 15-101-613 Telephonesetup Caller ID SET UPTelephone Usage Answering Machine Line AnsweringmachinesetupModem SET UP Telephone Initialization Wall Mount InstructionsTelephonepartidentification Page Volume Button Telephone FeaturesPulseandtonedialing Receiving a Phone CallRedialbutton Flash SwitchHoldbutton FlashbuttonStorebutton DataportPausebutton Message Waiting LampRingervolume SpeakervolumeHandsfreebutton MutebuttonPosition DIP SwitchOFF HeadsetcompatibleMaintenance Information TelephoneserviceproblemsTelephonerepair FCC Information G, H IndexLimitedwarranty