Handsfreebutton, Speakervolume, Ringervolume

HANDSFREEBUTTON

The Handsfree button (HF) is used to go off-hook without lifting the handset. The headset can be turned on and off by using the handsfree button.

SPEAKERVOLUME

Use the handsfree Speaker Volume slide control located on the right side of the phone base to change volume control handsfree. This increased volume should allow persons with hearing impairments to carry on normal conversations by adjusting the receive volume to its proper level.

RINGERVOLUME

Use the Ringer Volume controls located on the right side of the phone base to change ringer volume for Line 1 and Line 2. The 3-position switches are used to set ringer volume Off, Low or Hi. Remember to set the Ringer switches to Hi or Low when you want to receive calls.

MUTEBUTTON

Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up and remain lighted until you resume your conversation. To resume your conversation, press MUTE. The MUTE indicator will go out and your call can continue.

CONFERENCEBUTTON

1. To establish a three-way conference call, press HOLD while talking on one line. The first conference person is on Hold, the HOLD LED will light.

2. Press Line 1 or Line 2 whichever is not being used. Listen for dial tone. Dial the telephone number of the second person.

3. Press the conference button. You may now speak to the first and second person simultaneously.

Note: The first person is automatically released from hold after pressing the conference button.

4. Replace the handset in the cradle to disconnect both lines. To stay connected to only one line, press the desired line. The other line will be disconnected.

5. After conference call, press Line 1 or Line 2 to cancel conference call.