Clarity W-1000 manual Programming, To Dial Programmed Emergency Number

Page 16

Programming

Continued

E

N3. Pick up the handset from the phone

G

base, press and release the “PROGRAM”

button on the base unit.

L

 

I4. Dial the number you wish to store. S The number is not transmitted while

Hyou are programming it.You can program a pause into the dialing sequence, if necessary. Since there is not a separate pause button on the phone, the redial button serves this purpose during programming. Remember, you can store up to 15 digits and the pause function counts as 1 of those digits.

Note: Programming in the pause function will cause the phone to wait 3 seconds before dialing any more numbers. For example: Pressing a memory button that has 9<P>555-1212 programmed into it will dial the number 9, then wait 3 seconds and dial 555-1212. In most cases, you will not need to use a pause.

5. Press the “PROGRAM” button again, and then the appropriate Emergency Button.

6.Repeat steps 3, 4, and 5 for the other two Emergency Buttons.

7.Place handset back into cradle.

To Dial Programmed

Emergency Number:

1.Pick up the handset and listen for a dial tone.

2.Press the appropriate Emergency Button.

3.The number will be dialed automatically.

Important:The emergency buttons are not preprogrammed for 911.You must do this yourself. Use a preprinted 911 label and paste it over the button you program for 911. Use other write on labels to identify any numbers you wish to program into the two remaining emergency buttons.

Page 16

W-1000

W1000_User_Guide

16

11/15/99, 9:38 PM

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Clarity Table of Contents Important Safety Instructions Safety InstructionsRead and Understand All Instructions 1000 G L I S H Inside you will find the following items Unpacking the Walker ClarityRJ-11C Connecting the Clarity Phone InstallationSelect a Location Desk Mount Key Wall Mount Key Back Phone Wall Mount BracketWalker Clarity Features Clarity Power ControlSwitch Tabs Clarity Power ControlTo Increase Clarity Power FeaturesTo Decrease Clarity Power Ringer Volume Control Visual RingerRinger Pitch Control Tone/Pulse SelectionLast Number Redial To Set the TONE/PULSE SwitchTo Operate Last Number Redial To Use the Flash Feature To Use the Hold FeatureFlash HoldOperating the Walker Clarity To Place or Receive CallProgramming Emergency Number Into Memory To Program Emergency Numbers into the Clarity PhoneProgramming To Dial Programmed Emergency NumberProgramming Frequently-Dialed Numbers Write Emergency Numbers HereTo Dial a Frequently-Dialed Number Care Cascade DialingTo Dial the Number To ensure the utmost Performance, followTrouble-Shooting Guide Programming ProblemsCan’t Dial Out Can’t Store Numbers Into MemoryTroubleshooting Programming Personal Access CodesFeedback Problems Static On LineRinger Volume Problem CompatibilityInterference Problems Federal Communications Commission RequirementsUser Hears Radio Or CB Transmissions Over The Phone Connection and use with the nationwide telephone networkNotification to the telephone company FCC RequirementsPart 15 of FCC Rules Interference Information Walker Equipment Corporation Limited Warranty Who is Protected? Where? Walker Warranty ServiceHearing Aid Compatibility Out-of-Warranty Service Walker ServiceWalker Equipment Cloud Springs Rd Ringgold, GA Cloud Springs Rd. Ringgold, GA 30736
Top Page Image Contents