Programming
Continued
E
N3. Pick up the handset from the phone
Gbase, press and release the “PROGRAM” Button on the base unit.
L
I4. Dial the number you wish to store.
SYou can program a pause into the dialing
Hsequence if necessary.
and write the necessary information next to the corresponding number.
8.Repeat steps 3, 4, and 5 for each number you wish to enter into the memory. (Up to 10 different phone numbers)
Note: Programming in the pause function will cause the phone to wait 3 seconds before dialing any more numbers. For example: Pressing a memory button that has
Since there is not a separate pause button on the phone, the redial button serves this purpose during programming. Remember, you can store up to 15 digits and the pause function counts as 1 of those digits.
5.Press the “PROGRAM” Button again, and then the appropriate Memory Button you will store the number under.
6.Place handset back into the cradle.
7.To enter a name or number in the Memory Index, remove the plastic shield
Page 18
To Dial a Frequently-Dialed
Number:
1.Pick up the handset and listen for a dial tone.
2.Press the appropriate “Memory” button.
3.The number will be dialed automatically.
To change a
W1000_User_Guide | 18 | 11/15/99, 9:38 PM |