Clarity W-1000 manual Compatibility, Ringer Volume Problem

Page 22

Troubleshooting

Continued

E

 

N

Transmission Problems

G

 

L

I• The Person On The Other

SEnd Cannot HearYou

H

—Too many phones or phone devices on the line may effect your phone’s transmission.As a guideline, more than five (5) phones or phone devices may overload the phone line. Disconnect one

(1)or two (2) of the devices to see if that eliminates the problem. If not, contact your local phone company for load guidelines.

—You may not be speaking directly into the transmitter.Always speak directly into the mouthpiece in your normal tone of voice.

Compatibility

Clarity Phones Are Compatible With Digital PBX Systems

—If a standard, single line phone works, your clarity phone should also work.

Page 22

Clarity Phones Are Not Compatible With Key

Systems Or AT&T PBX

Systems

—These units have a large electronic box controlling many phones as one unit.These types of units may be found in office buildings and some retirement homes, nursing homes and condos.

Ringer Volume Problem

Unable To Hear Phone Ringer

—Slide the volume adjustment switch to the large dot and the pitch adjustment switch to the small dot.This will cause the ringer to sound at its lowest frequency.Typically, low frequencies are easier for people with hearing loss to detect.

—Consider purchasing a variable pitch auxiliary ringer such as the Walker WR-

100.These devices are exceptionally loud and can be plugged into any phone outlet in your home.

—Make sure the ringer volume is not set to OFF.

W-1000

W1000_User_Guide

22

11/15/99, 9:38 PM

Image 22
Contents Clarity Table of Contents Important Safety Instructions Safety InstructionsRead and Understand All Instructions 1000 G L I S H Inside you will find the following items Unpacking the Walker ClarityRJ-11C Connecting the Clarity Phone InstallationSelect a Location Desk Mount Key Wall Mount Key Back Phone Wall Mount BracketSwitch Tabs Walker Clarity FeaturesClarity Power Control Clarity Power ControlTo Increase Clarity Power FeaturesTo Decrease Clarity Power Ringer Pitch Control Ringer Volume ControlVisual Ringer Tone/Pulse SelectionLast Number Redial To Set the TONE/PULSE SwitchTo Operate Last Number Redial Flash To Use the Flash FeatureTo Use the Hold Feature HoldOperating the Walker Clarity To Place or Receive CallProgramming Emergency Number Into Memory To Program Emergency Numbers into the Clarity PhoneProgramming To Dial Programmed Emergency NumberProgramming Frequently-Dialed Numbers Write Emergency Numbers HereTo Dial a Frequently-Dialed Number To Dial the Number Care Cascade Dialing To ensure the utmost Performance, followCan’t Dial Out Trouble-Shooting GuideProgramming Problems Can’t Store Numbers Into MemoryFeedback Problems TroubleshootingProgramming Personal Access Codes Static On LineRinger Volume Problem CompatibilityUser Hears Radio Or CB Transmissions Over The Phone Interference ProblemsFederal Communications Commission Requirements Connection and use with the nationwide telephone networkNotification to the telephone company FCC RequirementsPart 15 of FCC Rules Interference Information Walker Equipment Corporation Limited Warranty Who is Protected? Where? Walker Warranty ServiceHearing Aid Compatibility Out-of-Warranty Service Walker ServiceWalker Equipment Cloud Springs Rd Ringgold, GA Cloud Springs Rd. Ringgold, GA 30736