Fujitsu E600 user manual Time and/or Date is not Correct, Error Messages on the Screen, Tips

Models: E600

1 62
Download 62 pages 7.46 Kb
Page 39
Image 39

Time and/or Date is not Correct

You can set the time and date in the BIOS Setup or in the operating system.

￿Set the time and date.

If the time and date are repeatedly wrong when you switch on your PC, the on-board battery is flat. Change the lithium battery as described in the "Extensions to the mainboard" - "Replacing lithium battery" chapter.

Error Messages on the Screen

Error messages and their explanation are contained:

￿In the technical manual for the mainboard

￿In the "BIOS Setup" manual

￿In the documentation for the programmes used

Restoring the Hard Disk Contents

Should you need to restore your hard disk, the instructions are provided on the case of the "Recovery

CD" (delivered with your system).

Tips

The PC cannot be switched off with the ON/OFF switch

Cause: The PC was not switched on with the ON/OFF switch.

￿Press the ON/OFF switch again. Cause: System crash

￿Press and hold the ON/OFF switch for at least four seconds until the PC switches off.

Out of system resources

If you have too many applications running at once, you may experience problems due to a lack of

system resources. In this case you should:

￿close unnecessary applications

or

￿run the applications in a different order

23

Page 39
Image 39
Fujitsu E600 Time and/or Date is not Correct, Error Messages on the Screen, Restoring the Hard Disk Contents, Tips