34
■Low-Profile Boards
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand The slot adapter is
located on the slot cover of the upper slot.

���Mounting slot adapter

Fit the slot adapter in the direction of the arrow (1) on the slot cover of the low-profile board and
screw it on (2).
Now you can install the low-profile board in a suitable slot like a normal board (see the "Installing
a board" chapter).

Removing slot adapter

Unscrew the screw (1) and remove the slot adapter in the direction of the arrow (2).
2
1
2
1
CHAPTER 4(25-36) 6/5/03, 7:58 PM34