￿Removing the graphics card

1 Open the casing (see "Opening the casing" chapter).

2 Remove the board bracket as described in "Removing board bracket" section.

3Press sideways against the retaining bracket and fold it up in the direction of the arrow (1).

4Press against the ledge of the slot (2) to release the graphics card from the slot.

5Pull the graphics card out of the slot in the direction of the arrow (3).

6Push the slot cover into the slot in the direction of the arrow (1). Make sure that the tip of the slot cover engages in the notch in the casing bottom.

7Fold the retaining bracket down again in the direction of the arrow (2). Ensure that the retaining bracket engages.

8Install the board bracket as described in "Installing board bracket" section.

9Close the casing (see "Closing the casing" chapter).

36

Page 52
Image 52
Fujitsu E600 user manual Removing the graphics card