Curtis TID991 owner manual To Store 3 One-Touch M1/M2/M3 Dialing Memories, Mute Function

You may select the flash time by following steps:

-Under on-hook or off-hook state, Press [STORE] and [FLASH] key at the same time.

-The LCD will display 'FLASH', press the number among 0-9 to select the flash time:

1: 100ms	2: 200ms	3: 300ms	4:	400ms	5:500ms	6: 600ms
7: 700ms	8: 800ms	9: 900ms	0:	1200ms

Mute Function

Holding down the 'MUTE' button prevents the other party from hearing your conversation with other people on your side until the button is released.

To Store 3 One-Touch (M1/M2/M3) Dialing Memories

-Get the dial tone

-Press [STORE] button

-Enter the number you want to store

-Press the desire one-touch button (M1/M2/M3)

To Store 10 Two-Touch Dialing Memories

-Get the dial tone

-Press [STORE] button

-Enter the number you want to store

-Press [AUTO] button

-Press the desire location among the digit 0-9

To Dial 3 One-Touch (M1/M2/M3) Dialing Memories

-Get the dial tone

-Press M1/M2/M3 (the location which was stored) to dial out the number

To Dial 10 Two-Touch Dialing Memories

-Get the dial tone

-Press [AUTO] button

-Press the digit among 0-9 (the location which was stored) to dial out the number

IMPORTANT NOTES

To operate the unit, you must have 'CALLER ID SERVICE' setup with your local telephone company. Some functions such as 'CALLER NAME INDICATION' will only operate if such services are included in the user's Caller I.D. program with the local telephone company.

1. Name		7.AM/PM
2.	Number	8.	Date
3.	New calls	9.	On Call Indicator
4.	Number of calls	10.		Message
5.	Number of Repeat Call	11.		Low Battery Indicator
6.	Clock	12.		Speakerphone