9. Service mode
Start Up
1.Push the cursor key ↑ or ↓ to highlight Identification. (menu
2.Press ENTER to display the Identification screen. (menu
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY LAMP DIMMING MORE...
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
BARCO
REALITY 6500
Proj. address: 001
Soft. version: 3.0
Network module: yes Config: front/ceiling Bautrate PC: 9600 text: on
Serial no:1010200 Run time: 100 h
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu | Menu |
9.4 Change Password
How to enable or disable the password function ?
This item is password protected when the password strap is installed.
The password function is enabled when the password strap on the controller module is installed. Consult an authorised Barco service technician to change the strap position.
How to change the password ?
1.Push the cursor key ↑ or ↓ to highlight Change Password. (menu
2.Press ENTER to display the Change Password menu. (menu
4 ’_’ characters are displayed. A new pasword can be entered with the digit keys of the RCU or local keypad. Everytime a digit is entered, a ’X’ appears on the screen. The confirm new pasword is still grayed out.
3.Press ENTER, the confirm new password item becomes active. Press EXIT if no changes have to be made.
4.4 ’x’ characters are displayed in the confirm new pasword area. Key in your password again with the digit keys of the RCU or the local keypad.
5.Press ENTER.
If the confirm new password entery is the same as the entered new password, the password is changed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY LAMP DIMMING MORE...
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
CHANGE PASSWORD
Enter new password
xxxx
Confirm new password
xxxx
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu | Menu |
78 |
| R5976182 BARCOREALITY 6500 30012001 |
