7. Random Access
7.2.5.1. Start up
How to start up the Edit menu ?
To start up the EDIT menu :
1.Push the cursor key ↑ or ↓ to highlight Edit. (menu
2.Press ENTER to select.
The Edit file adaptation menu will be displayed. (menu
3.Select the file which must be edited (mostly the active file).
4.Press ENTER.
The file name will be displayed in the upper right corner. (menu
FILE SERVICE
LOAD
RENAME
COPY
DELETE
OPTIONS
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
EDIT FILE |
| |
Filename | Scr | resolution |
video525.s01 | 1 | 675x240i |
video525.c01 | 1 | 675x240i |
video525.c02 | 1 | 675x240i |
Active file : Video525.c50
Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return.
EDIT FILE xga.s30 | ||
HORIZONTAL |
|
|
TOTAL | 1344 PIXELS | |
ACTIVE | 1024 PIXELS | |
START | 296 | PIXELS |
PERIOD | 20.678 µs | |
VERTICAL (FIELD) | ||
TOTAL | 806 | LINES |
ACTIVE | 768 | LINES |
START | 36 LINES | |
INTERLACED | [OFF] | |
READ AMDS |
|
|
OPTIONS |
|
|
↑ , ↓ , ← | , → | <ENTER>, <EXIT> |
|
|
|
Menu | Menu | Menu |
7.2.5.2. Changing the settings
Different methods
The 3 different methods to change a setting will be describe hereafter. These methods are :
•with the numeric keys on the remote control.
•with the arrow keys selecting the changing digit.
•with the arrow keys counting up or down.
How to change a setting with the numeric keys?
1.Push the cursor key ↑ or ↓ to select an item. The color of the selected item will change.
2.Press ENTER to activate the digits.
3.Enter directly with the numeric keys on the RCU or local keypad the new value.
How to change a setting with the cursor keys?
1.Push the cursor key ↑ or ↓ to select an item. The color of the selected item will change.
2. Push the cursor key ← or → to select the changing digit.
3.Push the cursor key ↑ or ↓ to scroll to the desired digit.
4.When finished, press ENTER to confirm.
How to change a setting with the cursor keys and counting up or down?
1.Push the cursor key ↑ or ↓ to select an item. The color of the selected item will change.
2. Counting up or down by pushing the cursor key ← ro → .
7.2.5.3. Correct value
What is already available during start up?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled in in the menu table. These values will be available when starting up the EDIT procedure of an active file.
R5976182 BARCOREALITY 6500 30012001 |
| 45 |