8. Installation mode
Defining the output module
To define the output modul:
1.Push the cursor key ↑ or ↓ to highlight 800 Peripheral. (menu
2.Press ENTER to select.
3.Push the cursor key ↑ or ↓ to highlight Output module. (menu
INSTALLATION
800PERIPHERALS CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
SHUTTER more ...
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
INFRARED [PPM]
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu | Menu |
8.10.2 Defining the Infrared Communication protocol
Which protocols are available?
When a peripheral is connected to the ’Comm Port’, the communication can be in PPM or RC5.
The type of communication can be set to :
•PPM
•RC5
Defining the communication protocol.
1.Push the cursor key ↑ or ↓ to highlight 800 Peripheral. (menu
2.Press ENTER to select.
3.Push the cursor key ↑ or ↓ to highlight Infrared. (menu
4.Press ENTER to select.
5.Press ENTER to toggle between [PPM] or [RC5].
INSTALLATION
800PERIPHERALS CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
SHUTTER more ...
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
INFRARED [PPM]
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu | Menu |
8.11 Configuration
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
•front/table
•front/ceiling
•rear/table
•rear/table
R5976182 BARCOREALITY 6500 30012001 |
| 73 |