4. Getting Started
How to change ?
1.Press ENTER to start up the adjustment mode. (menu
2.Push the cursor key ↑ or ↓ to highlight Installation.
3.Press ENTER to select. (menu
4.Push the cursor key ↑ or ↓ to highlight OSD color.
5.Press ENTER to select.
The OSD color menu will be displayed. (menu
6.Push the cursor key ↑ or ↓ to highlight the desired color.
7.Press ENTER to activate.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
INSTALLATION
800PERIPHERALS CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
SHUTTER more ...
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
OSD COLOR
HIGHTLIGHTED ITEM
RED
GREEN
YELLOW
Select with ↑ or ↓ then <ENTER> <EXIT> to return.
Menu | Menu | Menu |
4.5 Using the RCU
Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface. (image
Image
Pointing the RCU via the screen to the Ir sensor
32 |
| R5976182 BARCOREALITY 6500 30012001 |