Barco R9001960 Picture Services, Start up, File annotation How a file is built up, Random Access

7. Random Access

Start up

1.Push the cursor key ↑ or ↓ to highlight Random Access. (menu 7-1)

2.Press ENTER.

ADJUSTMENT MODE

Select a path from below :

AUTO IMAGE

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

Select with ↑ or ↓ then <ENTER> <EXIT> to return.

Menu 7-1

7.2 Picture Services

7.2.1 File annotation

How a file is built up

The file notation on a menu is built up in different parts. Let us have a look to these parts.

Take the following notation : xxxxxxxx.eee n ppppXppppi

xxxxxxxx	base name, 8 characters
eee	file extension
	first character C : custom made file
	first character S : standard file
	The second and third character is used for a following number (= file
	index). The file index for custom files : 00 to 63.
n	source number
ppppXpppp	active pixel rating
i	i or blank
	i = interlaced file
	blank = not interlaced
Table 7-1

7.2.2 Possible file manipulations

Connecting a new source.

Before using a new source, a correct file has to be installed. The projector’s memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and then edited until the source specs are reached.

file loading can be done automatically (see File options, page 50, in this chapter). Files with a ~ in front of the file name are temporary files. These files will be deleted when switching to another source.

42 R5976182 BARCOREALITY 6500 30012001