Barco R9001960 Operating the projector, Switching on How to switch on, Getting Started

		4. Getting Started
14	TEXT	when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale
		can be removed by pressing ’TEXT’ key first. To re-display the bar scale on the screen,
		press ’TEXT’ key again.
15	ENTER	to start up the adjustment mode or to confirm an adjustment or selection in the adjustment
		mode.
16	Cursor keys	to make menu selections when in the adjustment mode or to zoom/focus when the direct
		access is active.
		Comparison between the cursor keys and the use of the ’+’ and ’-’ keys on the local keypad
		: RCU = local keypad
		cursor key up = ’+’ key up
		cursor key down = ’-’ key down
		cursor key right = ’+’ key right
		cursor key left = ’-’ key left
17	EXIT	to leave the adjustment mode or to scroll upwards when in the adjustment mode.
18	RC operation indication	lights up when a button on the remote control is pressed. (This is a visual indicator to
		check the operation of the remote control)
Table 4-1

4.3 Operating the projector

4.3.1 Switching on

How to switch on.

1.Press the power switch to switch on the projector.

-When ’0’ is visible, the projector is switched off.

-When ’1’ is visible, the projector is switched on

The projector starts in standby mode. The projector indication lamp is red.

Starting image projection.

1.Press Stand by key once on the local keypad or on the remote control. The projector mode indication lamp will be green (image 4-2, image 4-3)

Image 4-2

R5976182 BARCOREALITY 6500 30012001 29