ASSEMBLY

MAINTENANCE FREE BATTERY

IMPORTANT: Before you attach the battery cables to the battery, check the battery date. The battery date tells if the battery must be charged.

1.Check the top of the battery for the location of the battery date (Figure 3).

2.If the battery is put into service before the battery date, the battery cables can be attached without charging the battery. See “How To Install The Battery Cables”.

3.If the battery is put into service after the battery date, the battery must be charged. See “How To Charge The Maintenance Free Battery”.

HOW TO CHARGE THE MAINTENANCE FREE BATTERY

WARNING: When you charge the battery, do not smoke. Keep the battery away from any sparks. The fumes from the battery acid can cause an explosion.

1.Remove the battery and battery tray.

2.Remove the protective caps from the battery terminals.

3.Use a 12 volt battery charger to charge the battery. Charge at a rate of 6 amperes for one hour. If you do not have a battery charger, have an authorized service center charge the battery.

4.Install the battery and battery tray. Make sure the positive (+) terminal is on the left side.

HOW TO INSTALL THE BATTERY CABLES

WARNING: To prevent sparks, fasten the red cable to the positive (+) terminal before you connect the black cable.

Use the fasteners shown below to install the battery cables. The fasteners are shown at full size.

(A)

(B)

2x82

14x79

1.Remove the protective caps from the battery terminals.

2.Fasten the red cable to the positive (+) terminal with the fas- teners as shown (Figure 3).

3.Fasten the black cable to the negative (-) terminal with the fas- teners as shown.

 

Positive (+)

 

Terminal

B

Red Cable

 

A

 

Battery

Black Cable

Battery Tray

 

 

A

 

Figure 3

HOW TO PREPARE THE ENGINE

NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed.

See the engine manufacturer’s instructions for the type of gasoline and oil to use. Before you use the unit, read the information on safety, operation, maintenance, and storage.

WARNING: Follow the engine manufacturer’s instructions for the type of gasoline and oil to use. Always use a safety gasoline container. Do not smoke when adding gasoline to the engine. When inside an enclosure, do not fill with gasoline. Before you add gasoline, stop the engine. Let the engine cool for several minutes.

IMPORTANT: This unit is equipped with an internal combustion engine and must not be used on or near any unimproved

forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it must be maintained in effective working order by the operator.

In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See an Authorized Service Center for a spark arrester for the muffler.

In some areas, local law requires the use of a resistor spark plug to control the ignition signals. See an Authorized Service Center for a resistor spark plug for the engine.

NOTE: Actual sustained horsepower will likely be lower due to operating limitations and environmental factors.

IMPORTANT! BEFORE YOU START MOWING

-Check the engine oil.

-Fill the fuel tank with gasoline.

-Check the level of the mower housing.

-Check the air pressure of the tires.

-Attach the battery cables.

F-030749L

12

Page 12
Image 12
Murray 405030x48A manual Maintenance Free Battery, HOW to Install the Battery Cables, HOW to Prepare the Engine

405030x48A specifications

The Murray 405030x48A is a powerful and versatile lawn mower designed to cater to a range of lawn care needs. This machine stands out for its efficiency, durability, and user-friendly features, making it an excellent choice for both homeowners and professionals seeking a reliable solution for maintaining their lawns.

One of the most noteworthy features of the Murray 405030x48A is its robust 30-inch cutting deck, which allows for wide cutting swath, enabling users to cover more ground in less time. This feature is particularly advantageous for larger properties, where maneuverability is essential. The deck is designed for easy height adjustment, granting users the flexibility to choose their preferred cutting height between various settings.

Powered by a reliable 405cc engine, the mower generates ample power to tackle even the toughest grass and terrains. This engine is designed to deliver consistent performance, ensuring that the mower runs smoothly, whether on flat lawns or uneven landscapes. The self-propelled function adds to the user experience by providing optimal control and ease of use, allowing users to navigate their lawns comfortably without excessive physical exertion.

The Murray 405030x48A incorporates advanced technologies such as a dual blade system. This system enhances cutting efficiency, resulting in finely mulched grass clippings that decompose quickly and enrich the soil. This eco-friendly feature is a great addition for environmentally-conscious users looking to maintain a healthy lawn.

In terms of build quality, the mower is made from high-grade materials that ensure longevity and resistance to wear and tear. The high rear wheels improve traction, specifically on hilly or uneven terrains, offering superior stability and easing the mowing process.

Another notable characteristic is its compact design, allowing for easy storage and maneuvering in tight spaces. This compactness does not compromise the mower's capabilities, making it a balanced option for both performance and convenience.

The Murray 405030x48A also features easy-to-access controls that enhance user experience, making it suitable for a wide range of users, from novices to experienced gardeners. With its combination of power, efficiency, and innovative features, the Murray 405030x48A stands out as a leading choice for individuals aiming to achieve a pristine lawn with minimal effort.