2. Installation Guidelines
Necessary tools
TorayseeTM cloth (delivered together with the lens kit). Order number : R379058.
How to clean the lens ?
Proceed as follow :
1.Always wipe lenses with a CLEAN TorayseeTM cloth.
2.Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3.Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4.If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this TorayseeTM cloth.
2.4 Batteries
Overview
•Battery installation
•Battery replacement
2.4.1Battery installation
How to install the battery
Two batteries are packed together with the RCU. Before using your RCU, install first these batteries.
1.Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2.Lift up the top side of the cover at the same time.
3.Insert the batteries as indicated in the RCU.
4.Put the battery cover on its place.
2.4.2Battery replacement
How to replace the batteries in the RCU
To replace the batteries :
1.Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2.Lift up the top side of the cover at the same time.
3.Push on the + side of the battery towards the - side
4.Lift up the battery at the same time.
5.Repeat for the second battery.
6.Insert the batteries as indicated in the RCU (battery type AA or LR6 or equivalent).
7.Put the battery cover on its place. (image
14 |
| R5976182 BARCOREALITY 6500 30012001 |
|
